This part come directly from Presto. The Tru Indicator is used on mane models of Presto Caners and Pressure Cookers. This part is used as a regulator as well as indicating the pressure inside caners and pressure cookers. The black indicator will pop up as pressure builds in the pot. The indicator has three lines to indicate 5lbs, 10lbs, and 15lbs of pressure. This part should be replaced if the indicator no longer rises with pressure. No tools are needed to replace this part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair
Replaced my grandmothers presto pressure cooker seal that I inherited many years ago I love cooking my artichokes in it so when it quit working properly I was glad to find the correct seal at eReplacement. Thanks
Guest - June 1, 2021
Verified Purchase
★★★★★
★★★★★
pressure cooker
I ordered parts for a 6 quart pressure cooker that had been in my attic. It is probably 60 years old. The rubber sealer fit like a glove. The pressure indicator works as well. I'm so happy I was able to restore it.
Guest - August 23, 2021
Verified Purchase
★★★★★
★★★★★
1960s cooker replacement parts found.
What I thought would be impossible to get for my 1960s Presto pressure cooker was made possible when I worked with a lovely lady in Canada who patiently found just the three parts I needed. My order arrived in shorter time than anticipated. Now I can continue to prepare my meals in my grandmother’s cooker . Thank you ereplacementparts!!
Guest - May 3, 2024
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the new Pressure Cooker/Canner Pressure-Tru Indicator from the box and use it the next time the pressure cooker is to be used. If you can take the old one off (with no tools), you can install the new one. I haven\'t tried it out yet, though.
I REMOVED THE OLD AIR VENT AND CLEANED THE AREA. I DID THE SAME WITH THE SEAL RING AND CLEANED THE AREA USING A KNIFE, STEEL WOOL, AND A Q-TIP. AFTER CLEANING, I FIT THE AIR VENT IN THE TOP AND MAKE SURE IT IS WELL PLACED. I DID THE SAME WITH THE SEAL RING AROUND THE INSIDE OF THE TOP MAKING SURE IT IS WELL SEATED. I TESTED THE RING BY PL
... Read moreACING THE TOP ON AND OFF THE BASE 3 TIMES CHECKING EACH TIME TO MAKE SURE THE SEAL RING STAYED IN PLACE.
Read less
Did you find this story helpful?
Thank you for voting!
Old age. Pressure cooker needed a new vent, a gasket and an indicator.
Removed old seals from a Presto 4 qt and 6 qt pressure cookers. I simply slipped the new ones in the slots. Also replaced the pressure release and valve. Easy install just make sure slots or groove is clean from of food and old seals.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10468417
Manufacturer Part Number: 09914
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
