OEM Makita Jig Saw Parts & Accessories

$47.60

Manufacturer Part Number:: 651225-5

This is a Trigger switch that has 4 leads and a locking mechanism for the trigger. This authentic Makita replacement part is sold individually. Switches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will...

Base

$46.33

Manufacturer Part Number:: 317565-8

The metal base assembly is an authentic OEM sourced part that is intended to be used with jigsaws from Makita. The base is one of the saw's main components and is used to support the motor and gearcase and to provide a stable platform for the saw. This item is priced as a single part, please note the base plate is a separate part.

Carbon Brush Set

★★★★★

(10)

$19.19

Manufacturer Part Number:: CB407

This set includes 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New b...

Switch St115a-40

$39.90

Manufacturer Part Number:: 651418-4

It is a high-quality item that is supplied directly from the original equipment manufacturer for use with Makita power tools. This is an authentic replacement for a damaged or missing switch which allows a user to turn the unit on and off, over time components tend to wear out and begin to fail eventually requiring a replacement. Keep in mind this durable plastic body switch is sold individually.

Stop Ring

★★★★★

(5)

$6.16

Manufacturer Part Number:: 961018-5

Genuine Makita replacement part this item is sold individually. E-rings are mostly used to keep a part in place and keep it from moving. This part is used in various areas of the different models of tools shown below.

Magnet Sleeve

★★★★★

(1)

$10.52

Manufacturer Part Number:: 688117-5

This part is available as an individual replacement part. The magnet sleeve goes between the stop ring and the wave washer. It is made of plastic and will require replacing if it becomes broken. A screwdriver may be needed when replacing the sleeve. This genuine item is supplied by the original equipment manufacturer for use with Makita sanders, grinders, trimmers, and jigsaws.

Switch Tg73bd

★★★★★

(3)

$33.50

Manufacturer Part Number:: 651976-0

This is a genuine OEM sourced replacement part commonly utilized on Makita saws. The purpose of this component is to allow a user to control the on/off function of the tool, over time parts may wear out and begin to fail eventually requiring a replacement. It is a high-quality switch which has a durable plastic body and is sold individually.

Switch

★★★★★

(5)

$41.92

Manufacturer Part Number:: 651922-3

This replacement switch is specially made for use on Makita power tools. Switches are a commonly replaced item in power tools. They play a key role by controlling on/off function of a tool. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a screwdriver. • First make sure the tools is not...

Carbon Brush Set

★★★★★

(9)

$15.17

Manufacturer Part Number:: CB70

Self Lock 6

$6.16

Manufacturer Part Number:: 259039-2

This is a genuine Makita replacement part that has been OEM sourced to ensure quality. The self-locking clip is intended to be used with laminate trimmers, angle grinders, jig saws, wet stone polishers, routers, and multi-tools. This item is used to secure a part assembly along a shaft. The application of the self-lock can vary based on the model of your equipment. It is recommended to review your...

Hex. Socket Head Bolt M3x10

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 266177-3

This is an authentic Makita replacement part, sourced from the original manufacturer for use with jigsaws and impact wrenches. The hex socket head bolt is used with different types of tools and the application of the bolt can vary based on the model of the equipment. This bolt is available as an individual replacement part.

Carbon Brush Set

★★★★★

(17)

$14.67

Manufacturer Part Number:: CB75

Makita Jig Saw Parts

Top Makita Jig Saw Models

Popular Makita Jig Saw Parts

Makita Jig Saw Models

Makita Jig Saw Parts

Search By Model or Part Number

Top Makita Jig Saw Models

Popular Makita Jig Saw Parts

Makita Jig Saw Models