OEM Makita Concrete Saw Parts & Accessories

H.l. Socket Head Bolt M5x16

$6.55

Minimum Quantity of 2 required

Manufacturer Part Number:: 266605-8

This is an OEM M5X16 head bolt on the tubular handle of a chainsaw. If the handle feels loose, inspect this bolt for damage. It is not safe to operate a chainsaw if the handle is lose or damaged. If the bolt goes missing or becomes damaged it will need to be replaced. This bolt is sold separately.

Hex. Bolt M8 X 25

$6.55

Minimum Quantity of 2 required

Manufacturer Part Number:: 266976-3

This is an authentic Makita replacement part manufactured for use with power cutter saws. The hex head bolt is commonly used to secure the pressure disc and blade to the axle. This hex screw includes a washer and is sold as an individual replacement part.

Suction Pipe, Ek6101

$9.57

Manufacturer Part Number:: 424777-7

Starter Assembly

$129.40

Manufacturer Part Number:: 123357-3

This is a genuine OEM replacement part used on Makita power cutters. This is the starter assembly that is used to crank start the unit. It includes a plastic shroud/housing, starter pulley, starter spring, grip and the pull rope. Please note the hardware/screws used to attach this assembly are sold separately.

Air Cleaner Element

$14.89

Manufacturer Part Number:: 443169-1

This is an OEM replacement part for Makita string trimmers. The air filter cleans the air entering and exiting the carburetor. This part is a common wear item, we recommend replacing the air filter periodically. For this repair you will need a pair of pliers and a screwdriver to remove any covers or shrouds. Be sure to unplug the spark plug and boot wire before starting this repair.

Air Cleaner Element

★★★★★

(1)

$6.55

Manufacturer Part Number:: 443171-4

This is a genuine OEM replacement part used with the Makita EM2650LH 4-Stroke String Trimmer. The air cleaner element is fitted within the cleaner cover assembly, and is sold individually. The foam material element captures particulates harmful to the motor. A hex key is needed for the repair.

O Ring 14

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 213162-7

It is a genuine OEM sourced item that is specially manufactured for use with Makita power tools. An o-ring is generally used to create a tight seal between two connected parts. Please note this replacement item has multiple uses depending on the model of your tool, make sure to refer to appropriate diagrams for correct application of this o-ring. Over time the material may deteriorate and crack, i...

Spark Plug

★★★★★

(1)

$16.80

Manufacturer Part Number:: 965-603-021

This is a genuine OEM approved replacement spark plug. It is commonly used with Makita power tools. The purpose of a spark plug is to deliver electric current from an ignition system to the combustion chamber. Over time spark plugs will wear out requiring replacement. Please note, this item is sold individually. You would need a spark plug wrench or a socket wrench to install the spark plug.

Cord Guard 10

$10.74

Manufacturer Part Number:: 682560-0

It is a genuine manufacturer-sourced which is specially designed for Makita power tools. Power cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point, right where the cord enters the tool. Unfortunately, over time the material will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made ...

Gasket

$6.34

Minimum Quantity of 2 required

Manufacturer Part Number:: 346876-4

Ball Bearing

★★★★★

(2)

$35.18

Manufacturer Part Number:: 211228-7

This authentic replacement part is specially designed for use with Makita power tools. Ball bearings are generally utilized to reduce the friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over time the components may wear out and begin to fail eventually requiring ...

Brush Holder Cap Hm 1800

★★★★★

(2)

$7.16

Manufacturer Part Number:: 643710-2

This brush holder cap is a genuine manufacturer sourced replacement part, it is not an aftermarket imitation. It is specially made for Makita power tools. It helps to secure the brush in the brush holder. This cap is made from durable hard plastic and it is sold individually. To replace it you will need a flat-head screwdriver.

Makita Concrete Saw Parts

Top Makita Concrete Saw Models

Popular Makita Concrete Saw Parts

Makita Concrete Saw Models

Shop by Popular Makita Concrete Saw Part Types

Makita Concrete Saw Parts

Search By Model or Part Number

Top Makita Concrete Saw Models

Popular Makita Concrete Saw Parts

Makita Concrete Saw Models

Shop by Popular Makita Concrete Saw Part Types