OEM Ryobi Sander Polisher Parts & Accessories

5 DISC ASSEMBLY W/ H&L – Part Number: 300527002

$9.39

Manufacturer Part Number:: 300527002

It is a genuine OEM sourced 5-inch sanding pad assembly that is specially designed for use with Craftsman orbital sanders. Its purpose is to provide support for hook and loop sandpaper, unfortunately, over time it may wear out or get damaged eventually requiring a replacement. To make the pad last longer do not put to much pressure on the sander when using it, the pressure will create heat and rui...

Hook And Loop Backing Pad

★★★★★

(46)

$10.95

Manufacturer Part Number:: 030157001018

This sander pad is compatible with the Ryobi random orbit sander listed below. It is genuine Ryobi replacement part. The pad features a durable foam body attached to a hard plastic backing plate. It is a five inch diameter pad with a hook-and-loop style underside for use with Hook and Loop type sandpaper. This pad has eight vacuum holes. Hook and Loop sandpaper has become very popular over the p...

Pad Assembly

★★★★★

(34)

$6.16

Manufacturer Part Number:: 039066005051

This is a genuine Ryobi replacement part. The pad is what the sandpaper is attached to by the clamps on the platen assembly. It includes the metal backing on the back of the pad. To remove the pad, simply remove the four phillips head screws that attach the pad to the platen.

Brake

★★★★★

(11)

$6.55

Manufacturer Part Number:: 030157001017

This brake is a genuine Ryobi replacement part. It is commonly used in random orbit sanders. It is made of rubber and sold individually. A screwdriver is needed for replacement. To replace this part: 1. Remove the backing pad by removing the four screws. 2. Remove the top cap by extracting the retaining screws. 3. Remove the switch trigger by lifting it out of the unit. 4. Remove the retaining sc...

Tile Saw Ball Bearing

★★★★★

(8)

$6.16

Manufacturer Part Number:: 671498001

Conversion Pad

★★★★★

(13)

$6.16

Manufacturer Part Number:: 900482001

Genuine Ryobi replacement part, this item is sold individually. The purpose of the 900482001 Conversion Pad is to convert the PSA (Adhesive Sand Paper) Pad to a Hook and Loop Pad. All you need to do is remove the adhesive paper from the back of the Conversion Pad and place it on the PSA Pad. Then you will have a Hook and Loop Pad.

Bearing Cap Assembly

★★★★★

(10)

$6.16

Manufacturer Part Number:: 030157001013

This is an authentic OEM part. The Ryobi bearing cap assembly is composed of metal and plastic, and has been designed for use with RS290 Random Orbit Sander and the RS290G Random Orbit Sander. This sealed bearing component helps to secure the fan and the brake. The bearing cap assembly helps devices to run smooth and cut down on internal friction. A screwdriver is needed in the removal and replace...

Ball Bearing (6000lu)

★★★★★

(7)

$5.35

Manufacturer Part Number:: 039176001012

It is an original manufacturer supplied replacement item and is sold individually. This ball bearing is sealed on both sides. Ball bearings are made to reduce friction between two rotating parts. Because they experience constant pressure they would need to be checked and replaced periodically to ensure top performance. Please check diagrams for correct location and application of this bearing.

Spring Clamp

★★★★★

(15)

$2.99

Minimum Quantity of 2 required

Manufacturer Part Number:: 039066005050

This is a genuine Ryobi replacement part, it is sold individually. The purpose of the 039066005050 Spring Clamp is to clamp the sandpaper to the platen of the sander. Once the sandpaper is placed on the sander the spring clamp is pulled up and attached to the side of the platen to secure the sandpaper. If you want to order the spring clamps already attached to the Platen you can order part number...

Brush Assembly (2 Required For

★★★★★

(1)

$6.37

Manufacturer Part Number:: 039066005005

This is an authentic Ryobi replacement part manufactured for use with 1/4 sheet double insulated sanders. Carbon brushes will wear out eventually because they are in constant contact with the rotating armature while the sander is in use. Worn brushes can cause the motor to spark or smoke, and can also cause the sander to turn off and on while in use. This brush is sold individually.

Brush Assembly (2 Required For

★★★★★

(5)

$6.16

Manufacturer Part Number:: 039143005002

This replacement brush assembly is an authentic OEM part that is specially made for Ryobi sanders. Carbon brushes are one of the most commonly replaced power tool components, through friction and regular use they will gradually wear away eventually requiring replacement. This assembly includes one carbon brush in a plastic holder with a metal wire terminal. To complete this repair you will need a ...

Pad

★★★★★

(3)

$7.08

Manufacturer Part Number:: 019284001002

This is an authentic replacement part manufactured for use with Ryobi sanders. The pad is used to mount the sandpaper and to provide a flat surface to support the sandpaper. This pad is available as an individual replacement part, please see model diagram for associative parts.

Ryobi Sander Polisher Parts

Top Ryobi Sander Polisher Models

Popular Ryobi Sander Polisher Parts

Ryobi Sander Polisher Models

Shop by Popular Ryobi Sander Polisher Part Types

Ryobi Sander Polisher Parts

Search By Model or Part Number

Top Ryobi Sander Polisher Models

Popular Ryobi Sander Polisher Parts

Ryobi Sander Polisher Models

Shop by Popular Ryobi Sander Polisher Part Types