OEM DeWALT Planer Jointer Parts & Accessories

Carbon Brush With Spring – Part Number: 5140011-85

$12.29

Manufacturer Part Number:: 5140011-85

This is an authentic OEM replacement part. Sold individually. Carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Because of this, carbon brushes are one of the most commonly replaced power tool parts. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carb...

Sprocket

★★★★★

(17)

$7.51

Manufacturer Part Number:: 5140010-81

Genuine Dewalt replacement part, this item is sold individually. This is a Drive Sprocket that works in conjunction with a drive chain. It is used on the Dewalt Planers shown below to drive the feed rollers. Depending on the model number you have, as in case of the DW734 uses one. The DW735 and the DW735X use four of this part.

Sprocket

★★★★★

(21)

$7.35

Manufacturer Part Number:: 285928-00

Genuine Dewalt replacement part, this item is sold individually. This Sprocket is used on the Dewalt Planers listed below to drive the feed rollers There are four of these Sprockets used in each Planer. The Sprocket has eight teeth, 5/8 bore, with a 3/16 key inside the bore.

Planer Drive Belt

★★★★★

(18)

$65.39

Manufacturer Part Number:: 5140010-28

This drive belt is for planers. Drive belt connects the motor pulley to the spindle assembly to spin the blades. Disconnect the power cord before installing this part. Wear work gloves to protect your hands.

Adapter

★★★★★

(20)

$15.52

Manufacturer Part Number:: 5140011-48

Genuine Manufacturer Approved replacement part designed for certain DeWALT Planers. This part is made out of Plastic and it is Sold Individually. This Adapter allows you to connect Dust Chute to your unit.

Circuit Breaker

★★★★★

(14)

$16.47

Manufacturer Part Number:: 5140000-19

This circuit breaker is specially produced for Dewalt planers. It is a genuine OEM sourced replacement part, not an aftermarket equivalent. Your planer is equipped with an 18 amp circuit breaker. If your planer becomes overloaded and stops operating, turn off the planer and press the reset button. If you have a faulty circuit breaker the motor would not start. Please note, this item is sold indivi...

Bushing

★★★★★

(15)

$5.37

Manufacturer Part Number:: 285945-00

Genuine Dewalt replacement part, this item is sold individually. This Bushing is installed on the ends of the feed rollers of the Dewalt Planers shown below, there are four of these bushings used on the planer. Over time because of metal to metal contact these bearings will wear and have to be replaced. If the feed rollers are loose or they are not feeding the stock correctly these parts be inspected for wear.

Blade Clamp

★★★★★

(3)

$6.84

Manufacturer Part Number:: 663290-00

This is a genuine manufacturer-sourced replacement screw wich is specially designed for use with DeWALT portable hand planers. It is an identical replacement for a missing or a faulty clamp that is utilized to secure the blade, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made o...

Carbide Tipped Blade

★★★★★

(8)

$11.66

Manufacturer Part Number:: 273794

This is a genuine Dewalt replacement part, it is sold individually. The purpose of the 372105-01 Blade, is to plane wood material and leave a smooth finish. There are two blades requires on each of the tools listed below. This Blade is reversible. To remove the blade ,loosen the bolts that secure the blades. Use a screwdriver to begin sliding the blade out, then you can carefully remove it with y...

Drive Chain

★★★★★

(10)

$10.40

Manufacturer Part Number:: 285960-00

This genuine Dewalt drive chain is designed for use with planers. The purpose of this item is to drive the roller. Over time chain will stretch and would need to be replaced. It is made out of metal and it is sold individually. You would need a screwdriver and snap-ring pliers to complete this repair.

Rear Roller

★★★★★

(6)

$103.32

Manufacturer Part Number:: 5140010-94

This is a genuine DeWalt part that is OEM sourced to ensure a high level of quality. The rear roller is intended to be used with 13" planers. This item attaches to the drive chain and sprocket and is used to guide material out of the back of the planer. This item is available as an individual replacement part.

Bushing

★★★★★

(4)

$9.92

Manufacturer Part Number:: 5140006-82

This replacement bushing is an authentic high quality item that is sourced from original equipment manufacturer for use with Dewalt planers. Two of these bushings are used to secure the roller, please note this durable metal part is sold individually. Replacing this bushing will require a set of tools such as long nosed pliers, a screwdriver and a wrench set.

DeWALT Planer Jointer Parts

Top DeWALT Planer Jointer Models

Popular DeWALT Planer Jointer Parts

DeWALT Planer Jointer Models

Shop by Popular DeWALT Planer Jointer Part Types

DeWALT Planer Jointer Parts

Search By Model or Part Number

Top DeWALT Planer Jointer Models

Popular DeWALT Planer Jointer Parts

DeWALT Planer Jointer Models

Shop by Popular DeWALT Planer Jointer Part Types