Craftsman Nailer Seals and Gaskets

This is an authentic Bostitch replacement part used on specific Nailers. This is a Rubber Ring and it is sold individually. O-rings are designed to withstand thousands of pounds of pressure by creating a seal between two or more parts.

This is a Genuine Manufacturer Sourced replacement part designed for Nailers/Staplers. This O-Ring provides an Air-Tight Seal for the Valve Piston. Over time this O-Ring will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of Rubber and it is Sold Individually. Replacing this item you would need Hex Key/Allen Wrench and Pliers to replace this item.

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers and staplers. The seal is used to prevent leaks between the head valve and the end cap spacer. This item is available as an individual replacement part.

This is a Genuine Manufacturer Sourced replacement part designed for Nailers/Staplers. This O-Ring provides an Air-Tight Seal for the Driver Unit. Over time this O-Ring will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of Rubber and it is Sold Individually. Replacing this item you would need Hex Key/Allen Wrench and Pliers to replace this item.

Genuine Bostitch replacement part, this item is sold individually. The 850607 is used in the Bostitch pneumatic tools shown below. It is used in different areas of some of these tools.. The most popular is being installed on the piston of most of the nail guns shown to help create a seal. On the Staplers it is installed on the cylinder, also to create a seal. Over time seals will wear and crack an...

This part is an authentic replacement part used in various Bostitch and Porter Cable power tools. An o-ring is a gasket used to create a strong seal between solid pieces. It is a simple yet essential part of a tool. Please note that the proper size o-ring is necessary for proper sealing, and there are often more than one size used per tool. This piece is sold individually.

This genuine OEM part is found in various models of staplers/nailers manufactured by Bostitch, Porter Cable, and DeWALT. An O-ring is a bendable part used between solid pieces, creating a seal which can maintain and withstand high pressure. One machine may use multiple styles of O-ring and care is needed to ensure that the correct one is used in the correct place. Sold individually.

This piston O-ring creates a tight seal between the piston and cylinder, allowing proper air pressure to build for strong and consistent fastening performance. Made from durable rubber, it is designed to withstand repeated use while maintaining reliability. Replacing a worn or damaged O-ring can restore driving power and help prevent air leaks, ensuring your tool operates effectively.

This is an authentic manufacturer-sourced replacement component which is specially designed for use with staplers and nailers. It is generally utilized to provide an air-tight seal for the cylinder sleeve. Over time it may wear out and begin to crack eventually requiring a replacement, keep in mind this high-quality part is made of durable rubber and is sold individually.

This item has been OEM sourced to ensure a high level of quality. The o-ring is intended to be used with pneumatic nailers from Bostitch, Porter Cable, and DeWalt. The o-ring is used to seal the connection between the nose and the bottom of the cylinder. This item is sold as an individual replacement part.

Genuine Manufacturer Approved replacement part designed for certain Nailers. This part is made out of Rubber Material and it is sold individually. The purpose of this part is to create a seal so air does not leak from the gun. When replacing this Seal it is advised to inspect all of the other Seals and O-Rings for wear.

This is an OEM part sourced directly from the manufacturer. The head valve seal is found in a Porter Cable framing nailer. This part is made of plastic, and is placed in the head valve to help control the flow of air into the cylinder. You may require an Allen wrench or hex key when replacing this item. The head valve is provided as an individual replacement part.

This o-ring is an authentic OEM part specially designed for use with Dewalt and Porter Cable nailers. The purpose of an o-ring is to provide an air tight seal between connected parts. Includes one (1) rubber o-ring per order. To complete this repair you will need a hex key/allen wrench.

This O-ring provides a tight seal within pneumatic tools, helping maintain proper air pressure for smooth and efficient operation. Made from durable, oil-resistant rubber, it is designed to handle repeated use and wear. Replacing a worn or cracked O-ring can help restore driving power and prevent air leaks, ensuring reliable tool performance.

This is a genuine manufacturer-sourced replacement part which is specially designed for use with DeWALT and Porter Cable nailers. It helps to distribute the pressure and provide a tight seal between connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Over time the material may wear out and begin to crack ev...

This is a genuine replacement part sourced directly from the manufacturer. The frame/cap gasket is found in Porter Cable brad nailers and staplers. This part is made of flexible plastic, and is used to seal the connection between the cap and the frame. You will require an Allen wrench or hex key when replacing this item. The frame/cap gasket is sold as an individual replacement part.

This o-ring is used to provide an air tight seal for the cylinder. It is an authentic OEM sourced replacement item that is specially produced for use with framing nailers. It is made from high quality rubber material and it is sold individually.

This is an authentic Bostitch replacement part, sold individually. O-rings are designed to withstand thousands of pounds of pressure by creating a seal between two or more parts. This O-ring is compatible with the staplers and nailers listed below.

A genuine item that is supplied by the original equipment manufacturer for use with Bostitch and Porter Cable nailers and staplers. It is a special o-ring which is generally utilized to provide an air-tight seal for the end cap, make sure to check the appropriate diagram of your model for the correct application of this hardware. The part is made of durable rubber and is sold individually, over ti...