OEM DeWALT Miscellaneous Parts & Accessories

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: N618274

The manufacturer states that, "The magnet ring must be installed with three (3) drops of Loctite 680 in the pattern of a triangle on the armature shaft, position the ring, install bearing and let sit for 12hrs minimum."

Sub Base Clamp

★★★★★

(3)

$10.72

Manufacturer Part Number:: A27941

The D-shaped sub base attaches to the D-shaped base with crosshead screws. This is a genuine DeWALT and Porter Cable replacement part that is sourced from the original manufacturer for use with compact routers. It is made out of plastic and will need to be replaced if it cracks or breaks. A Phillips-head screwdriver will be required during the replacement of this part which is available individually.

Adaptor

★★★★★

(5)

$6.16

Manufacturer Part Number:: 147794-00

This genuine OEM dust adapter in your jointer plate allows you to attach various sizes of vacuum hoses to it for direct dust pick-up. It is part of the dust collection system, you can easily check if the dust adapter is damaged by visually inspecting it for signs of wear or deformations. If you find that it has become loose, fails to create a tight seal, or does not fit the vacuum hose sizes prope...

Comp. Spring

★★★★★

(1)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 400001-00

This eccentric spring is sourced directly from the original equipment manufacturer for DeWALT routers. It is an important part which applies tension on the safety cover. If the spring is damaged or is missing, this will provide an identical replacement. To ensure the correct installation of this hardware, check the appropriate diagram of your specific model. This high-quality spring is made of a d...

Trigger Valve Assembly

★★★★★

(60)

$17.26

Manufacturer Part Number:: N566148

This is a Genuine OEM replacement part used on some Dewalt Nailers and Staplers. This item includes a new valve and o-rings. If your tool is leaking air or the trigger valve is stuck, replacing this part may resolve the issue.

Replacement Spool

★★★★★

(10)

$42.03

Manufacturer Part Number:: 90599025

This is a genuine OEM sourced part used on the DeWalt DCST990M1 (Type 1) 40V 15" String Trimmer. The plastic and metal replacement spool is fastened to the gearcase assembly at the base of the trimmer. This item houses and dispenses the cutting line for trimming grass. A screwdriver is needed for the installation, and the replacement spool is sold individually.

Blade Insulator

★★★★★

(7)

$6.34

Minimum Quantity of 2 required

Manufacturer Part Number:: 90541434

This blade insulator is an authentic Black and Decker replacement part. It is supplied from original equipment manufacturer for use with push/walk-behind lawn mowers. It acts as a adapter/spacer for the mower blade. This item is made out of plastic material and it is sold individually. To replace it you would need a wrench to remove the blade nut.

Foot

★★★★★

(4)

$10.73

Manufacturer Part Number:: N074647

Genuine Dewalt replacement part, this item is sold individually. The purpose of the N074647 Foot is to keep the Miter Saw Stands shown below, stable and keep them from sliding on the surface they are placed on. There are four of these feet on each stand. To fasten the foot to the stand you will need to order part number 330019-32 Screw.

O-RING-.487X.103

★★★★★

(4)

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: 850143

Genuine Bostitch replacement part, this part is sold individually. The purpose of this O-Ring is to create a seal around the Piston Stem of the Bostitch Floor Nail Guns shown below. Over time O-Rings can wear and become brittle or stretched. When your Nail Gun becomes sluggish or the Driver won't retract, it may be time to tear the Gun down and inspect all of the O-Rings and Seals.

Spindle Lock Button

★★★★★

(5)

$9.72

Manufacturer Part Number:: 658797-00

This is an Authentic OEM replacement part for a DeWalt fixed base router. The purpose of the spindle lock button is to lock the spindle in place. This is made of a rubber button with a metal shaft and is an individually sold part. Never press the spindle lock button while the motor is running doing so can damage the spindle lock.

Brush

★★★★★

(9)

$12.02

Manufacturer Part Number:: A27343

This is an OEM Manufacturer Sourced replacement carbon brush used on specific Compact Routers. Includes 1 Carbon Brush with wire lead attached. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are com...

Grease Tube

★★★★★

(3)

$52.50

Manufacturer Part Number:: N365763

It is a genuine item that is supplied by the original equipment manufacturer for use with DeWALT cordless grease guns. This is the main container which holds the grease. It is an identical replacement for a missing or a damaged grease tube that was included with a new unit. It is made of durable materials and is sold as an individual item. To ensure the correct repair procedure, refer to the owner...

DeWALT Miscellaneous Parts

Top DeWALT Miscellaneous Models

Popular DeWALT Miscellaneous Parts

DeWALT Miscellaneous Models

DeWALT Miscellaneous Parts

Search By Model or Part Number

Top DeWALT Miscellaneous Models

Popular DeWALT Miscellaneous Parts

DeWALT Miscellaneous Models