Black and Decker Electric Drill Power Cords

Length: 8' Gauge: 18 Wires: 2 Type: Bare Wire This cord is a genuine DeWalt replacement part. This cord is compatible with the list of models below. This part is made for double insulated tools It is a two wire cord with two prongs and does not need a ground wire. The cord is sold individually. Installation of this part requires the new cord wires to go correctly into wire terminals also rou...

This cord protector is a genuine DeWalt replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.

This genuine cord protector, also known as a strain relief boot, is designed to safeguard the power cord where it enters your tool housing. Made from flexible, durable material, it helps prevent the cord from bending, twisting, or fraying during regular use, supporting safe and reliable performance. Small but essential, this component is an effective replacement if the original protector is worn o...

This cord is a genuine DeWalt replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 2 Prongs • 2 Wires • 18 Gauge • 8 Feet Long

This cord is a genuine DeWalt replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 18 Gauge • 10 Feet Long

This replacement 10 foot power cord is specially produced for Black and Decker and Dewalt power tools. It is designed to connect to a standard US outlet supplying power to the tool. Please note one rubber insulated cord is included per order, the cord protector is not included it is sold separately. To complete this repair you will need a screwdriver.

This is a genuine OEM sourced replacement part designed for use with a variety of power tools. Cord guards, also called cord protectors, are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard. It is made out of rubber and it is sold individually.

This 10 ft. power cord is a genuine manufacturer sourced replacement part that is specially produced for Black and Decker and Dewalt power tools. It is used to supply electricity from a standard U.S. outlet to the tool. One durable rubber insulated cord is included per order, please note the cord sleeve protector is sold separately.

This rubber piece is a genuine OEM part manufactured for DeWALT and Black & Decker. It is sold individually. A cord protector attaches at the point of connection between cord and power tool. It protects cord and wires from damage caused by stress, strain, and motion. This repair is fairly simple and requires just a screwdriver. A damaged cord must be replaced as well. Replacement cords are sold se...

This replacement power cord is a genuine OEM sourced item that is specially produced for Black and Decker power tools. Its purpose is to supply electricity to the tool from a standard U.S. outlet. This high-quality rubber insulated cord is sold individually, please note the cord protector is included.

This cord is a genuine DeWalt replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. rnPower Cord Specifications: rn • 3 Prongs rn • 3 Wires rn • 18 Gauge rn • 15 Feet Long

This is a replacement part sourced directly from the manufacturer for Dewalt drills. The cord protector is used to protect the cord from getting damaged. To install the cord protector requires no tools, simply slide the cord into place through the cord protector. This part is made of rubber and is sold individually.

This replacement power cord is a genuine OEM sourced item that is specially designed for use with Black and Decker and Dewalt power tools. Its purpose is to supply electricity from a standard U.S. outlet to the tool. This high quality rubber insulated cord is included per order, please note the cord protector is not included, it is sold separately.

This is a genuine manufacturer-sourced replacement 10 ft. cord, it is specially designed for use with Dewalt and Black and Decker power tools. If the cord is damaged it is important to replace it before continuing to use the tool. This high-quality rubber insulated power cord is sold individually, please note it includes the end sleeve also known as the cord protector.

This is a genuine part which is supplied directly by the original equipment manufacturer and is used with Porter Cable, Black and Decker, and Dewalt impact wrenches and drywall screwdrivers. When plugged into the wall, the power cord transfers power to the unit. This part is made of flexible plastic and metal, it is also sold individually. For installation, you will need a screwdriver to remove an...

This replacement cord protector is an authentic component which is supplied by the original equipment manufacturer for use with DeWALT and Black and Decker power tools. It fits through the opening in the housing where the power cord is wired, it will protect the base of the cord from getting bent or pinched. It is made of high-quality rubber material and it is sold individually.

This is an OEM part sourced directly from the manufacturer. The Cord protector is used in Black & Decker drills to guard the connection between the cord and the drill. It also provides a place to store the chuck key. This part is made of semi-flexible rubber, and is sold individually. You may require a flat-head screwdriver to pry the old part free, and then the new part can be slotted into place.

This is a genuine manufacturer-sourced component which is specially designed for use with Black and Decker drill drivers. It is an identical replacement for a missing or a damaged cordset that is hardwired to the unit in order to supply electricity from a standard U.S. outlet. Please make sure to refer to the appropriate diagrams of your model to ensure the correct repair procedure. Keep in mind t...