Concrete Saw Springs and Shock Absorbers

It is a genuine component that is supplied by the original manufacturer for use with Husqvarna power cutters. This is an identical replacement for a missing or a damaged hardware that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this part. Keep in mind it is a high-quality spring which is made of durable metal ...

This part is an OEM from Husqvarna. The metal spring is made for use with several chainsaws. This item helps to secure the pawl to the flywheel, and is sold individually. A hex key and a pair of pliers are often necessary for the installation.

This is an authentic Makita replacement part manufactured for use with power cutter saws. This metal spring is used within the recoil starter assembly. It is used to provide tension to retract the starter rope after it has been pulled to start the saw. The rewind spring goes through wear every time the saw is started and can become bent if it disconnects from the starter pulley. The rewind spring ...

This part is an OEM from Husqvarna. The metal clutch spring is compatible with many lawn and garden engines. The spring is fitted in the clutch, cushioning the clutch's movement. Keep in mind, two springs are needed. An Allen wrench and a pair of pliers are often necessary for the installation. Please refer to the specific manual and diagrams for additional instructions. The clutch spring is sold individually.

This is an authentic replacement part manufactured for use with Husqvarna chainsaws and power cutters. The spring is commonly used to provide tension to the pawl on the flywheel and the spring allows the pawl to pivot. This spring is available individually, please note two springs are required.

This spring is an OEM part direct from Husqvarna. The metal spring is made for use with many chainsaws, and is sold individually. This component is connected to the throttle catch and the throttle trigger, providing the needed resistance in the handle assembly. A hex key and a pair of pliers are required for the installation.

This is an authentic Makita replacement part. The compression spring is designed by the manufacturer for use in power tools such as screwdrivers, angle grinders, and rotary hammers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different springs used in the machine. Refer to the parts diagram to be sure of o...