Campbell Hausfeld Compressor Hoses and Tubes

Genuine Campbell Hausfeld replacement part, this item is sold individually. The ST033001AV Compression Nut is used to attach the copper tubing to certain components of the compressors listed below. Along with the Compression Nut you will need to use a compression sleeve ( or Ferrule) to seal the tube from leaking air. The Compression Nut will go on the tubing first then the Ferrule will slide into the nut.

It is a genuine replacement part that is supplied by the original manufacturer for use with Campbell Hausfeld air compressors. The discharge tube transfers air between the cylinder and the tank on an air compressor. Over years due to regular wear and vibrations the ends of the outlet tube may begin to crack and leak eventually requiring replacement. It is a complete assembly which includes a durab...

This genuine OEM replacement nipple is designed for use in air compressors, serving as a critical connector between the pressure switch, the tank, and the regulator. A damaged or corroded nipple can lead to air leaks and inconsistent pressure, affecting overall performance. To check for leaks, apply soapy water to the fittings around the pressure switch and watch for bubbles. If replacement is nec...

This is a genuine OEM replacement part used with many air compressors machines. the exhaust tube is constructed of metal, and secures the tank to the cylinder head. This item helps with releasing the pressure overflow from the tank. An adjustable wrench is needed for the repair. This item is sold individually.

This tube fitting provides a secure connection point for tubing, helping ensure reliable flow and leak-free operation. It is commonly replaced when fittings loosen, crack, or show signs of wear.

This is an authentic OEM sourced part which is specially designed for Campbell Hausfeld air compressors. It is an identical replacement for a missing or damaged exhaust tube that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality tube is made of durable metal and is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for use with Campbell Hausfeld air compressors. This is an identical replacement for a missing or a faulty inlet filter that was installed on a new unit. It is an important component that helps to ensure that the air that goes through the unit is free of dust and other harmful contaminants. Please make sure to refer to th...

This exhaust tube is an original part from Campbell Hausfeld. The aluminum tube is compatible with several air compressor models. This item pulls the condensation from the tank, and is sold individually. An adjustable wrench is needed for the installation. Please refer to the manual for safety and repair instructions.

This is a genuine manufacturer-supplied component which is designed for Campbell Hausfeld air compressors. It is a special 3" nipple that connects to the pressure switch. Over time it may wear out or get damaged eventually requiring a replacement. Keep in mind this high-quality part is made of durable metal and is sold as an individual item. Check the diagrams for your model to ensure the correct repair procedure.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Campbell Hausfeld compressors. It is a high-quality replacement for a missing or a damaged exhaust tube that was installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct location and application of these components. Keep in mind this high-quality e...

This is an original replacement part manufactured for use with air compressors. This air hose is a complete assembly and is coiled for easy storage. The hose includes brass fittings, but depending on the tool or application an adapter may be needed. The hose is sold individually.

This is an authentic replacement part sourced directly from the manufacturer. The exhaust tube kit is commonly found in Campbell Hausfeld air compressors. This part is made of braided metal, with metal connectors, and comes with two metal washers. You will require a wrench when replacing this item.