DeWALT Hammer Parts
We sell only genuine OEM DeWALT ® parts.
Top DeWALT Hammer Models
-
DeWALT DCH273B (Type 20) Rotary Hammer Parts
-
DeWALT D25481K (Type 1) 1-9/16 Combo Hammer Parts
-
DeWALT D25553K (Type 1) 1-9/16 Rotary Hammer Parts
-
DeWALT D25980KB (2) Breaker Hammer Parts
-
DeWALT D25980KB (Type 1) Breaker Hammer Parts
-
DeWALT D25980KB (Type 2) Breaker Hammer Parts
-
DeWALT D25980KB (3) Breaker Hammer Parts
-
DeWALT D25980KB (Type 3) Breaker Hammer Parts
Popular DeWALT Hammer Parts
- Manufacturer Part Number:
- 328771-07
This is an authentic replacement part manufactured for use with DeWalt rotating hammers. The grease is used to lubricate the gears to ensure they move together smoothly and to prevent damage to the gears. The grease tubes are sold individually.
- Manufacturer Part Number:
- N268241
This is a genuine Dewalt replacement part, it is sold in individually with the mounting screw. The Dewalt Belt Hook is attached to the bottom of the handle assembly on the tool model numbers shown below. Its purpose is to hook the tool to your belt when not using the tool.
- Manufacturer Part Number:
- 330003-64
- Manufacturer Part Number:
- 603754-01
This genuine OEM sourced replacement part is made for use with DeWALT power tools. The purpose of a cabon brush is to conduct the current in an electric motor. Unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement to ensure peak performance. This high-quality brush box is sold individually, keep in mind it includes the metal holder, the brush and the...
- Manufacturer Part Number:
- 583890-00
This is an authentic OEM part. The metal ball from DeWALT is used in rotary hammer drills. It is designed to hold the drill bit in place, and fits inside the spindle. A screwdriver may be needed to replace the part. Please refer to the owner's manual and the diagram of your specific model for proper installation. This item is individually priced.
- Manufacturer Part Number:
- 871690
It is a genuine item that is supplied by the original equipment manufacturer for use with DeWALT and Black and Decker power tools. It is an identical replacement for a missing or faulty spring that was installed on a new unit, unfortunately, over time it will wear out or may begin to crack eventually requiring a replacement. Keep in mind this high-quality part is made of durable metal and is sold ...
- Manufacturer Part Number:
- 578387-00
This is an authentic replacement part used in rotary hammers. The metal washer is used for spacing for the cylinder assembly, and protects the tube from wear. This washer is sold individually, please see model diagram for any additional parts.
- Manufacturer Part Number:
- N413662
- Manufacturer Part Number:
- N127530
This Ball Bearing is sealed on both sides. It is a genuine replacement part and is sold individually.
Ball bearings are used to reduce friction between rotating parts.
The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly.
Bearings experience cons...
- Manufacturer Part Number:
- 1005550-03
This carbon brush kit is a genuine OEM sourced item, it is not an aftermarket imitation. It is specially designed for Dewalt demolition hammers. This set includes (2) carbon brushes with lead wires attached. It is advised to replace both brushes at the same time. You will need a screwdriver to complete this repair.
- Manufacturer Part Number:
- 323489-00
This is a genuine part which is supplied by the original equipment manufacturer for use with DeWALT and Black and Decker rotary hammers. The cap provides cushioning for the chuck. If the component is worn, damaged or missing, this will provide an identical replacement for the original cap that was installed on a new unit. Refer to the appropriate diagrams for your model to ensure the exact locatio...
- Manufacturer Part Number:
- N031214
This is a genuine Dewalt replacement part, it is sold in a set of two. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items,...
DeWALT Hammer Models
-
DeWALT DCH273B (Type 20) Rotary Hammer
-
DeWALT D25481K (Type 1) 1-9/16 Combo Hammer
-
DeWALT D25553K (Type 1) 1-9/16 Rotary Hammer
-
DeWALT D25980KB (2) Breaker Hammer
-
DeWALT D25980KB (Type 1) Breaker Hammer
-
DeWALT D25980KB (Type 2) Breaker Hammer
-
DeWALT D25980KB (3) Breaker Hammer
-
DeWALT D25980KB (Type 3) Breaker Hammer
-
DeWALT DCD985M2 (Type 2) 20V Hammerdrill
-
DeWALT D25603K (Type 1) 1-3/4In Combo Hammer
-
DeWALT D25723K (Type 1) 1-7/8In Combo Hammer
-
DeWALT D25550K (1) 1.5 Rotary Hammer
-
DeWALT D25551K (2) 1.5 Rotary Hammer
-
DeWALT D25550K (2) 1.5 Rotary Hammer
-
DeWALT D25551K (1) 1.5 Rotary Hammer
-
DeWALT D25551K (3) 1.5 Rotary Hammer
-
DeWALT D25260K (Type 1) 7/8 Sds Plus Hammer
-
DeWALT DC228KL (Type 1) 28V Hammer
-
DeWALT D25763K (Type 1) 2In Combo Hammer
-
DeWALT D25901K (Type 2) Demolition Hammer