Makita Compressor Parts

Makita Appliance Parts

We sell only genuine OEM Makita ® parts.

Top Makita Compressor Models

See All Models

Popular Makita Compressor Parts

Manufacturer Part Number:
412024-E
This is a manufacturer approved replacement part designed to work with Makita air compressors. The pressure switch tells your compressor when to stop and when to start. There are multiple reasons a pressure switch could be leaking air. If it is leaking air the pressure switch should be replaced for a compressor to operate properly and safely.
Manufacturer Part Number:
N036518
This is a Genuine OEM replacement part designed for use with Air Compressors. This kit Includes: Piston Rod, Compression Ring , Cylinder Sleeve & Bearing. Please note that this kit does not include the valve plate, head gaskets, or any other compressor parts. Replacing this kit you would need a Screwdriver, Hex Key/Allen Wrench and Pliers.
Manufacturer Part Number:
D30139
Genuine OEM replacement parts kit. This Gasket Kit is used to prevent air leaks in the compressors listed below. Over time the gaskets will become compressed or cracked and you will hear an air leak coming from the compressor. They will need to be replaced. This would be a good time to inspect all the other wear parts of the compressor.
Manufacturer Part Number:
410029-E
This is an authentic Makita replacement part that has been OEM sourced to ensure a high level of quality. The regulator is intended to be used with air compressors. This part attaches to the manifold block. The regulator is used to adjust the amount of air pressure inside the tank. This item is sold as an individual replacement part.
Manufacturer Part Number:
N036517
This is an Original Manufacturer Approved replacement part used on some Air Compressors. This Kit Includes: Cylinder Sleeve, Compression Ring, Piston Rod Cap Screw. This is the is a hollow, round cavity or chamber with smooth walls that houses the Piston.
Manufacturer Part Number:
HY00000991
Manufacturer Part Number:
HY00001031
Manufacturer Part Number:
125004-E
Manufacturer Part Number:
413008-E
The drain cock fits onto the air tank with frame. It is an OEM replacement part for Makita air compressors. This part is available individually and is made of metal. A wrench may be required to replace this part if it becomes broken.
Manufacturer Part Number:
GK5200-E
2,4,15and22
Manufacturer Part Number:
170013-E
It is an authentic Makita air filter assembly that is sourced from original equipment manufacturer for use with air compressors. The purpose of the filter is to ensure the air that goes in the unit is free of dust and other contaminants. This is a complete assembly which includes the metal housing, cover, pleated paper filter element and the thumb screw that is used to secure the cover.
Manufacturer Part Number:
411029-E
This replacement pressure gauge is a high quality item designed for Makita air compressors. It is an authentic item that is sourced directly from original equipment manufacturer to provide in-tank pressure readings for the user. Please note one pressure gauge is included per order. When replacing this item you will need a wrench, make sure to unplug the air compressor and bleed out air from the tank.

Makita Compressor Models

Shop by Popular Makita Compressor Part Types