I used the adjusting handle to replace the jointer\'s parallel arm on the outfeed side. After installing the handle I used a dowel marker pin on top of the bracket screw to mark a drill hole on the inside of the table cover. I drilled this hole a bit oversize in order to allow for slop.
Then I used an 8mm washer and nut to
... Read morelock the table cover onto the bracket screw, just like the Jet JJP-12 has.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19154947
Manufacturer Part Number: JT9-JJP12-014
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of JT9-JJP12-014 Jet ADJUSTING HANDLE")
_WW_1.gif "Part Location Diagram of JT9-JJP12-014 Jet ADJUSTING HANDLE")
