- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Planer Knives (set) 708807
- Manufactured by:
- Jet
- ERP Number:
- ERP10382106
- Part Number:
- 708807
Works with your model JWP-15CS!
$164.80
Special Order
Works with your model JWP-15CS!
Product Description
?This is a genuine Jet replacement part. The planer knives are designed by the manufacturer for use in planers. This is a set of three metal knives, which are placed in the cutter head. You may require a wrench when replacing these parts.
Troubleshooting
This part works with the following brands:
- Jet
This part works with the following products:
- Planer Jointer
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Wood didn\'t feed properly
mark from groveton, New Hampshire
1 person
found this instruction helpful.
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
- Parts Used:
- JT9-JWP15H-020, 708807
1-Remove top dust cover
2-Rremove side gear and chain cover
3-Lower bed to lowest point and place a wood block under infeed roller then remove end shaft bolt.
4-Remove the spring tensioner screws on top of the head
5-Drop the old roller out and
6-Put a little grease on the new shaft ends and install the new ... Read more shaft tighten all bolts
7-Replace old tension springs with 4 new ones and secure them
8-Remove old blades and replace with new ones
2-Rremove side gear and chain cover
3-Lower bed to lowest point and place a wood block under infeed roller then remove end shaft bolt.
4-Remove the spring tensioner screws on top of the head
5-Drop the old roller out and
6-Put a little grease on the new shaft ends and install the new ... Read more shaft tighten all bolts
7-Replace old tension springs with 4 new ones and secure them
8-Remove old blades and replace with new ones
Read less
Did you find this story helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10382106
Manufacturer Part Number: 708807
Manufacturer Part Number: 708807
| Brand | Model Number | Description |
|---|---|---|
| Jet | 722150 | Planer Jointer - Jet 722150 Parts |
| Jet | 722155 | Planer Jointer - Jet 722155 Parts |
| Jet | JWP-15CS | Planer Jointer - Planer |
| Jet | JWP-15HO | Planer Jointer - 15 Inch Planer |
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖