Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
12145306-1-M-Delta-22-563-Drive Belt
Part Location Diagram of 22-563 Delta Drive Belt
See part 104 in the diagram
( Grid squares measure 1x1 inch )
12145306-1-S-Delta-22-563-Drive Belt 12145306-2-S-Delta-22-563-Drive Belt Part Location Diagram of 22-563 Delta Drive Belt

Drive Belt 22-563

Manufactured by:
Delta
ERP Number:
ERP12145306
Part Number:
22-563
Original Equipment Manufacturer ?
  Works with your model  22-580!
$62.04
★★★★★
★★★★★
5 Reviews
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(9 rated repairs) ?
  Works with your model   22-580!

Jump to:

Description Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

A genuine item that is supplied directly from the original equipment manufacturer for use with Delta equipment. It is a high-quality replacement for a worn or broken belt that helps to drive the unit, over time material tends to deteriorate and it may begin to crack eventually requiring a replacement to ensure peak performance. Keep in mind this durable rubber belt is sold individually.

Troubleshooting

This part works with the following brands:
  • Delta
This part works with the following products:
  • Planer Jointer
★

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    5
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Fit great
Belt fit perfectly took a little while to get here.
Guest - September 23, 2019
Verified Purchase
★★★★★
★★★★★
Planer belt
Got the belt quicker than I was supposed to. Looking forward doing business in the future. Thanks
Guest - November 8, 2019
Verified Purchase
★★★★★
★★★★★
Delta drive belt.
Part arrived when it was supposed too, and part worked great.
Guest - July 15, 2020
Verified Purchase
★★★★★
★★★★★
Belt
I'm glad you had what I needed
Guest - August 10, 2021
Verified Purchase
★★★★★
★★★★★
Speedy Service
I have ordered 3 parts in recent days and they have been shipped out right away and received within 5 days. I am an amateur woodworker and my old tools are breaking down, so it is good to have a source for parts.
Guest - September 18, 2021
Verified Purchase

Questions & Answers

?

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
My delta planer no longer feeds the wood through and it sounds like a stripped gear ? What do i need
James - March 11, 2023

Hi James, Thank you for your question. If your planer is not feeding the wood, there are some parts that you will need to check to see which one is causing the issue. We recommend checking the drive belt, the infeed and outfeed rollers, the planer knives and the key. If you suspect the gears, you will need to check them to. Once you have determined the part you need, please call customer service. We look forward to hearing from you!

eReplacementParts Team
March 11, 2023

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(9 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The drive pulley worn out causing the belt to go out of alignment, melting the belt and belt guard.

Gerald from Hammond, Wisconsin

11 of 11 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
1313113, 22-563, 1349860, 1342156
I\'ve got a Delta 22-560. The planer smelt like burnt plastic, so I removed one of the side covers. There are 2 screws at the bottom of the side cover. I then found out that this side housed the chain drives, and they all looked alright. So I then removed the other side cover, and the cutterhead locking handle. This exposed the be lt guard and belt. I then could see that they were all melted and worn out. The belt pulley came loose and the center hole in the pulley was worn too large. So I ordered a new cutterhead pulley, key- way and drive belt. I tried to order a new belt guard but I found out that it was discontinued. So I formed one out of plastic. I then reinstalled the parts and assembled the side covers. While I fixing it, I also replaced both motor brushes and cleaned off the outfeed roller and the infeed roller. For $70.00 in parts, I\'m back woodworking. Better than $300-$400 for a new one.
Read less
Did you find this story helpful?
Thank you for voting!

Left-turn nut came loose resulting in drive pulley spinning off the key and breaking

Edgar from Sheffield, Massachusetts

7 of 7 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
22-563, 903468, 899310
1. Opened Delta planer casing (not easy)
2. Removed old (ruined) pulley
3. Replaced key, pounded new pulley (carefully using wooden blocks) into place
4. Locked pulley in place with left-turn nut
5. Rolled new belt onto motor and drive pulleys (also not easy)
6. Replaced casing, knobs, etc.

Erep lacementparts sent the exact parts needed, and delivery was made a day earlier than expected. Thanks.
Read less
Did you find this story helpful?
Thank you for voting!

Drive belt broke

DENNIS from WARREN, Rhode Island

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Parts Used:
22-563
Disassembled enough of the planer to be able to access the drive belt location using a screwdriver and the torx type tool that came with the Delta planer. The large nut that holds the planer blade pulley was loose enough to cause a slight wobble in the pulley. I don\'t know if this wobble was the cause of the broken belt or not (the plane r is about 20 years old) but I tightened that to eliminate the wobble. Getting the new belt on the planer was the most difficult task. I started by placing the belt on the small drive wheel and getting as much of the belt as possible on the larger pulley and then turning the pulley and slowly trying toward the belt on both wheels. This was not as easy as it sounds as the belt is extremely tight. I eventually worked the belt entirely on the large pulley but only about half way on the smaller drive wheel. This wheel has parallel grooves in it which interlock with similar grooves in the belt (which serve to keep the belt in place when the planer is in operation) that, unfortunately, make it very difficult to slide the belt across to fully seat it. After struggling for too long a period trying to \"work\" the belt all the way on, I simply placed a small flat blade screwdriver on the belt just before the small drive wheel and then turned the wheels enough to bring the screwdriver onto the wheel. Then I just lifted the screwdriver enough to \"disengage\" the belt/wheel grooves and the belt slid nicely into place. This I had thought of this sooner. Reassembled the planer in the reverse order and everything now works great.
Read less
Did you find this story helpful?
Thank you for voting!

Drive belt on Delta planer

Frederick from College Station, Texas

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
22-563
1. Removed cover and old belt
2. Replace with new belt by tuning it onto the pulleys, making sure it was aligned correctly in all groves
3. Replaced out cover
Did you find this story helpful?
Thank you for voting!

The cutter head shaft nut backed off and allowed the pulley to be hammered out of round so that the planer wouldn\'t make smooth cuts.

Kenneth from Seattle, Washington

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
22-563, 1349860, 1342211, 1342156
I removed the nut, pulled the mangled pulley and key off of the shaft, and removed the shaft lock, Then, after cleaning everything up, installed the new parts. I used Lotcktite when replacing the nut. Apparently, having the nut back off the shaft is a known problem with this planer, but I used it for 15 years before having any kind of problem. It has been a really great machine in spite of the issues outlined here. For about $50, I was able to make it a basically new machine again.
Read less
Did you find this story helpful?
Thank you for voting!

Drive pulley and belt damaged

ed from SOUTH RANGE, Michigan

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Parts Used:
22-563, 1342156
Removed damaged pulley and belt and replaced with new.
Nut on pulley had come lose. Used \"Loctite\" and extra torque to replace.
Did you find this story helpful?
Thank you for voting!

drive belt broke key was worn

Donald from STAUNTON, Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
22-563, 1349860
replace belt and key put thread lock on nut so it would not come loose
Did you find this story helpful?
Thank you for voting!

Pulley worn and loose on shaft

James from Katy, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
Parts Used:
22-563, 1342156
1. Removed the pulley and belt.
2. Replaced with new one.
Did you find this story helpful?
Thank you for voting!

Pulley came loose and damaged drive belt

William from Menifee, California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
22-563
Reinstall pulley, added blue lock tight to nut and install new belt.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP12145306
Manufacturer Part Number: 22-563
Brand Model Number Description
Delta 22-560 Planer Jointer - Planer
Delta 22-565 Planer Jointer - Planer
Delta 22-580 Planer Jointer - Planer
Delta 22-590 Planer Jointer - 13"Portable Thickness Planer
Delta TP400LS Planer Jointer - 12-1/2&#34 Planer
Drive Belt
$ 62.04
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖