Part Location Diagram of LB5052 Senco Seal
See part 42 in the diagram
( Grid squares measure 1x1 inch )

Seal LB5052

Manufactured by:
Senco
ERP Number:
ERP10074737
Part Number:
LB5052
Original Equipment Manufacturer ?
  Works with your model  SLP20!
On Order

Easy 

30 - 60 mins 

(2 rated repairs) ?
  Works with your model   SLP20!

Product Description

?

An authentic replacement seal that is supplied by original tool manufacturer for use with Senco nailers and staplers. This item helps to create an air-tight seal between the piston and the cylinder walls. During normal operation, the piston ring does not actually touch the cylinder wall, a thin film of oil separates the two components. A worn or broken seal will allow combustion gases to escape and enter the crankcase, causing low compression and a loss of power. If compression is reduced significantly, the engine will not run at all. Please note this high-quality plastic seal is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Senco
This part works with the following products:
  • Nailer

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Leaking air, broken seal

Aaron from Kingston, Oklahoma

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Parts Used:
LB5052
Removed the four allen screws from the top cover. Found the seal broken in pieces. I then completely cleaned the inside of the stapler and then lubed it. Put the stapler back together. Now it works like new.
Did you find this story helpful?
Thank you for voting!

wasn\'t setting nails

Howard from NICHOLASVILLE, Kentucky

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
Parts Used:
LB5052, LB0024, EA0072
installed new piston assembly
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10074737
Manufacturer Part Number: LB5052
Brand Model Number Description
Senco LS1XP Nailer - Air Nailer
Senco SLP20 Nailer - Air Nailer
Senco SLP20XP Nailer - 18 Ga. Brad Nailer
Senco SLP20XP18Ga Nailer - Slp20xp 18 Ga Brad Nailer W/ Case
Senco SLS20 Nailer - Senco Sls20-(490017n) Parts
Senco SLS20XP Nailer - 18 Ga. Finish Stapler
Senco SLS20XP-HF Nailer - Senco Sls20xp-Hf-(490021n) Parts
Senco SLS20XP-K Nailer - Senco Sls20xp-K-(490101n) Parts
Senco SLS20XP-L Nailer - Senco Sls20xp-L-(490105n) Parts
Senco SLS20XP-M Nailer - Senco Sls20xp-M-(490107n) Parts