Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
10074642-1-M-Senco-LB1095-Seal
Part Location Diagram of LB1095 Senco Seal
See part 64 in the diagram
( Grid squares measure 1x1 inch )
10074642-1-S-Senco-LB1095-Seal Part Location Diagram of LB1095 Senco Seal

Seal LB1095

Manufactured by:
Senco
ERP Number:
ERP10074642
Part Number:
LB1095
Original Equipment Manufacturer ?
  Works with your model  SLS15MG!
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

A Bit Difficult 

Less than 15 mins 

(1 rated repair) ?
  Works with your model   SLS15MG!

Jump to:

Description Frequently Purchased Together Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is an original Senco replacement part. The seal is designed by the manufacturer for use in brand nailers and finish staplers. This part is made of flexible plastic, and is used to seal the connection between the exhaust valve and the firing valve. Please be aware that there are different seals used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require an Allen wrench or hex key when replacing this item. This part is sold individually.

Frequently Purchased Together

?
Seal
★★★★★
★★★★★
(1)
$6.16
In Stock
Minimum Quantity of 2 required
Seal
$6.16
In Stock
Minimum Quantity of 2 required
Seal
$6.16
In Stock
Minimum Quantity of 2 required

Troubleshooting

This part works with the following brands:
  • Senco
This part works with the following products:
  • Nailer

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

Less than 15 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

air leaking out of exhaust handle

George from Pueblo, Colorado

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
LB1097, LB1095, KB6428, BC0579
On the brad guns the exhaust air comes out the handle around the air intake plug so it is hard to tell where the air is leaking from .I had plugged my gun into a compressor that some one had turned up over 120 psi. which had broken a piece on the exhaust valve that holds one of the o rings all the way up in the top of the gun .After repl acing the exhaust valve ,the spring ,and the small o ring ,and the large o ring the brad gun works great .E replacement parts got the right parts out in a hurry and I got gun up and running for less than $30. It would have taken me a lot more time and money to find a service center to repair it .
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10074642
Manufacturer Part Number: LB1095
Brand Model Number Description
Senco BN31M1P Nailer - 18 Gauge Brad Nailer
Senco FinishPro15 Nailer - 18 Ga. Brad Nailer
Senco FinishPro18 Nailer - 18 Ga. Brad Nailer
Senco FinishPro1818Ga Nailer - Finishpro 18 5/8 To 2 Inch 18 Gauge Brad Nailer
Senco FinishPro18MG Nailer - 18 Ga. Brad Nailer
Senco FinishPro2N1 Nailer - 18 Ga. Brad Nailer / Finish Stapler
Senco FinishPro2N118Ga Nailer - Finishpro 2n1, 1-1/4 Inch 18 Gauge Brad Nailer/Stapler
Senco FP18MG Nailer - Air Nailer
Senco LS61H1P Nailer - 18 Gauge Finish Stapler
Senco SLS15 Nailer - 18 Ga. Finish Stapler
Senco SLS15MG Nailer - 18 Ga. Medium Wire Stapler
Senco SLS18 Nailer - 18 Ga. Finish Stapler
Senco SLS18MG Nailer - 18 Ga. Finish Stapler
Seal
$ 6.16
In Stock
Minimum Quantity of 2 required
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖