This is an OEM part sourced directly from the manufacturer. The seal is found in Senco finish nailers. This part is made of flexible plastic, and is used to help seal the connection between the cylinder and piston. Please be aware that there are different seals used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this item. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This part is sold individually.
Troubleshooting
This part works with the following brands:
Senco
This part works with the following products:
Nailer
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Most online advice for a firing pin that does not retract indicates that it could be a bent firing pin, o-ring around the cylinder, or plugged holes in the cylinder under that o-ring.
I couldn\'t see anything particularly wrong with any of that but did see my firing valve washer was cracked and chipped. Since the parts are in
... Read moreexpensive, I ordered all the o-rings for the nailer and a new firing valve washer. Replacing all that did not solve my problem.
Finally, I started disassembling other parts of the nailer to look for trouble. Trigger valve appeared to be ok. I took apart the exhaust cap and there was my problem! Tiny pieces of that deteriorated firing valve washer had clogged the exhaust ports, restricting exhaust air flow. Blowing all of that out completely solved my issue. These pieces could not be seen until I took apart the exhaust (essentially to the point where you can see the muffler mesh).
My nailer is about 12 years old but only gets occasional household use. I figured my problem was dried o-rings but I was wrong. Hope this helps anyone else with this issue.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10074552
Manufacturer Part Number: LB0966
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Nailer","title":"Nailer","url":"/parts/power-tool/nailer/"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/power-tool/nailer/seals-and-gaskets/"},{"position":3,"name":"LB0966","title":"LB0966","url":""}]
