Part Location Diagram of KB6428 Senco Spring
See part 56 in the diagram
( Grid squares measure 1x1 inch )

Spring KB6428

Manufactured by:
Senco
ERP Number:
ERP10074084
Part Number:
KB6428
Original Equipment Manufacturer ?
  Works with your model  SLS18!
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

Less than 15 mins 

(2 rated repairs) ?
  Works with your model   SLS18!

Product Description

?

This is an original replacement part sourced directly from the manufacturer. The spring is commonly found in Senco brad nailers and finish staplers. This part is made of metal, and is used to supply tension between the exhaust valve and firing valve. You will require an Allen wrench or hex key when replacing this part. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This item is sold as an individual replacement part.

Troubleshooting

This part works with the following brands:
  • Senco
This part works with the following products:
  • Nailer

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Spring broke

Jeff from OSHKOSH, Wisconsin

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
KB6428, HC0572, CA0124, BC0707
Rmoved old spring and replaced
Did you find this story helpful?
Thank you for voting!

air leaking out of exhaust handle

George from Pueblo, Colorado

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
LB1097, LB1095, KB6428, BC0579
On the brad guns the exhaust air comes out the handle around the air intake plug so it is hard to tell where the air is leaking from .I had plugged my gun into a compressor that some one had turned up over 120 psi. which had broken a piece on the exhaust valve that holds one of the o rings all the way up in the top of the gun .After repl acing the exhaust valve ,the spring ,and the small o ring ,and the large o ring the brad gun works great .E replacement parts got the right parts out in a hurry and I got gun up and running for less than $30. It would have taken me a lot more time and money to find a service center to repair it .
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10074084
Manufacturer Part Number: KB6428
Brand Model Number Description
Senco BN31M1P Nailer - 18 Gauge Brad Nailer
Senco FinishPro15 Nailer - 18 Ga. Brad Nailer
Senco FinishPro18 Nailer - 18 Ga. Brad Nailer
Senco FinishPro1818Ga Nailer - Finishpro 18 5/8 To 2 Inch 18 Gauge Brad Nailer
Senco FinishPro18MG Nailer - 18 Ga. Brad Nailer
Senco FinishPro2N1 Nailer - 18 Ga. Brad Nailer / Finish Stapler
Senco FinishPro2N118Ga Nailer - Finishpro 2n1, 1-1/4 Inch 18 Gauge Brad Nailer/Stapler
Senco FP18MG Nailer - Air Nailer
Senco LS61H1P Nailer - 18 Gauge Finish Stapler
Senco SLS15 Nailer - 18 Ga. Finish Stapler
Senco SLS15MG Nailer - 18 Ga. Medium Wire Stapler
Senco SLS18 Nailer - 18 Ga. Finish Stapler
Senco SLS18MG Nailer - 18 Ga. Finish Stapler