Part Location Diagram of HC0414 Senco Safety Element
See part 35 in the diagram
( Grid squares measure 1x1 inch )

Safety Element HC0414

Manufactured by:
Senco
ERP Number:
ERP10073491
Part Number:
HC0414
Original Equipment Manufacturer ?
  Works with your model  FINISHPRO42XP15GA!
$15.49
On Order

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   FINISHPRO42XP15GA!

Troubleshooting

This part works with the following brands:
  • Senco
This part works with the following products:
  • Nailer

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

It would not reliably fire a nail even thought the safety nose was as press d against the surface being nail d.

Jim from Brookhaven, Mississippi

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
HC0414
1. Removed nosepiece with hex wrench
2. Installed new actuator wire replacing old unit
3. Reinstalled the nosepiece
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10073491
Manufacturer Part Number: HC0414
Brand Model Number Description
Senco FinishPro42XP Nailer - 15 Ga. Finish Nailer
Senco FinishPro42XP15Ga Nailer - Finishpro 42xp, 2-1/2 Inch 15 Gauge Finish Nailer