Part Location Diagram of BC0391 Senco Seal
See part 7 in the diagram
( Grid squares measure 1x1 inch )

Seal BC0391

Manufactured by:
Senco
ERP Number:
ERP10071591
Part Number:
BC0391
Original Equipment Manufacturer ?
  Works with your model  PW150-3/4!
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   PW150-3/4!

Product Description

?

It is a genuine seal that is supplied directly from the original equipment manufacturer for use with Senco nailers and staplers. This special part is utilized to provide an air-tight seal for the firing valve, please make sure to check appropriate diagrams of your model for the correct location and application of this hardware. Over time the material may wear out and begin to crack eventually requiring a replacement to ensure the proper seal. It is a high-quality component which is made of durable rubber material, please note it is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Senco
This part works with the following products:
  • Nailer

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Leaking air from the top

Ronald from WAUKEGAN, Illinois

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Parts Used:
BC0391
Remove the top cap by removing the four allen head screws. Locate the broken seal and clean out the entire cylinder of the pieces. Clean and oil the inside of the gun. Install the new seal and put the gun back together. Easy
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10071591
Manufacturer Part Number: BC0391
Brand Model Number Description
Senco BN31M1P Nailer - 18 Gauge Brad Nailer
Senco FinishPro15 Nailer - 18 Ga. Brad Nailer
Senco FinishPro18 Nailer - 18 Ga. Brad Nailer
Senco FinishPro1818Ga Nailer - Finishpro 18 5/8 To 2 Inch 18 Gauge Brad Nailer
Senco FinishPro18MG Nailer - 18 Ga. Brad Nailer
Senco FinishPro2N1 Nailer - 18 Ga. Brad Nailer / Finish Stapler
Senco FinishPro2N118Ga Nailer - Finishpro 2n1, 1-1/4 Inch 18 Gauge Brad Nailer/Stapler
Senco FP18MG Nailer - Air Nailer
Senco LS61H1P Nailer - 18 Gauge Finish Stapler
Senco PW150 Nailer - Crown Stapler
Senco PW150-3/4 Nailer - Crown Stapler
Senco PW150R Nailer - Crown Stapler
Senco Pw151 Nailer - 16ga Wide Crown Stapler (Pw150-3/4)
Senco PW200 Nailer - Crown Stapler
Senco SLS15 Nailer - 18 Ga. Finish Stapler
Senco SLS15MG Nailer - 18 Ga. Medium Wire Stapler
Senco SLS18 Nailer - 18 Ga. Finish Stapler
Senco SLS18MG Nailer - 18 Ga. Finish Stapler