This is a high-quality part which is supplied by the original manufacturer. It is specially made for use with Porter Cable nailers. It helps to provide a tight seal for the head valve. Over time it may wear out and begin to crack eventually requiring a replacement. For the exact location and the correct installation, please refer to the appropriate diagrams of your model. This high-quality part is made of durable rubber material and is sold individually. You will need a screwdriver and a wrench set to take the tool apart and perform the repair.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Porter cable round head nail framing nailer
The seal that was recommended did the job. It arrived in perfect condition. So I was able to get my nailer back on line for a very reasonable price and she is good as new. Thanks Ereplacement parts
Phillip - June 25, 2020
Verified Purchase
★★★★★
★★★★★
Part was an exact match, easy repair.
Part fit perfectly. Shipped really quickly. Very good experience.
Shelton - April 28, 2022
Verified Purchase
★★★★★
★★★★★
.
Quick delivery, correct part. Thanks.
John - January 12, 2023
Verified Purchase
★★★★★
★★★★★
Porter cable seal
Wrong seal!
Randy - August 28, 2023
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(12 rated repairs)?
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Removed top end allen screws
Removed internal parts and cleaned bits and pieces of shattered piston bumper
Reassembled with new bumper in place
Test fired with no nails - worked and sounded good
Loaded nailer with nail clip.
Test fired with nails - worked fine
Nailer is in great working order
I used the allen wrench that came with the nailer to remove the cap.
I removed the broken piston bumper
I removed the valve seal
I cleaned the internal area of the gun completely & oiled it
I installed the new parts
I then screwed the cap back on
Removed top from tool. Cleaned out fragments of old piston stop which was completely destroyed. Replaced with new piston stop, seal and o rings. Replaced top. I had found detailed instructions on You Tube.
Did you find this story helpful?
Thank you for voting!
Driver would not return all the way, to fire the next nail
Repair was easy and cost effective. All I did was watch the video first to see if I wanted to tackle the project. When it was over discovered there really isn\'t a lot of parts inside to keep me from trying it. So, I disassembled the nailer and found the source- broken piston bumper. I could see all kinds of plastic pieces scattered throu
... Read moreghout the internal workings of the gun. After a good cleaning and a check of all the o-rings, the top portion of the nailer would have to be replaced. Next, I ordered the parts from the website which was simple and easy- in fact I also found a part to my Porter Cable sander as well. After a few short days the parts arrived and I put the gun back together, plugged it into the compressor and tried it out. \"P-ka,\" the nailer was once again making that sweet sound that my wife can\'t stand.
Now if I had to buy the complete overhaul kit I\'m not too sure I would have fixed the nailer. Reason being, the big box stores are always having a sale and a new one could be found for 30-50 dollars more with a one year warranty. Unless, I already had an abundance of nails that were specific to the old nailer then I would fix the old one.
Good Luck with your project and may the force be with you!
Unscrewed and removed the head of the nailer.
Pulled out the cylinder
Replaced two o rings on cylinder
Replaced seal on bottom of cylinder
Put it back together.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Nailer","title":"Nailer","url":"/parts/power-tool/nailer/"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/power-tool/nailer/seals-and-gaskets/"},{"position":3,"name":"886108","title":"886108","url":""}]
