This authentic manufacturer-sourced replacement component which is produced for Porter Cable nailers and staplers. It is the special part which provides an air-tight seal for the cylinder spacer, please refer to appropriate diagrams of your model for the correct location and use of this hardware. This durable o-ring is made of high-quality rubber and it is sold individually, note that over time the material tends to become brittle and may crack allowing air to escape which will result in a loss of power. Inspect o-rings and gaskets periodically and replace them as needed to maintain peak performance.
Troubleshooting
This part works with the following brands:
Porter Cable
This part works with the following products:
Nailer
Part# 886098 replaces these:
886098,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
This nailer is about 17 years old and has seen a lot of use. The last time I used it is work for a couple of trigger pulls and then began leading air through the top vent and stopped driving. I did some research on the repair and then went to the manufactures web site, but they no longer carried any parts. All the parts I needed I got fro
... Read morem eReplacment parts.
Disassembly was fairly simple. The piston was stubborn to remove but a sharp rap on a wooden block did the trick. Checked all the parts for damage and found that the spring bumper was broken in several places. Ordered that part and replaced all the seals since the unit was apart. Recommend lubricating each seal and its mating part before reassembly. A good cleaning of the tool is also recommended along with oiling other areas with moving parts. Works great. Recommend about 80-85 psi when operating brad and finish nailers.
Removed the four allen head screws from the cylinder cap and removed it
Removed the cylinder and cleaned the inside of the gun
Installed all of the o-rings, piston stop and gasket
Oiled the insides of the gun
Replaced the cylinder cap
Did you find this story helpful?
Thank you for voting!
Nailer won\'t fire, only leaked air while the trigger was depressed in the trigger area
Disassembled the trigger and then removed the trigger valve from the body of the gun using a socket. I replaced all of the O-rings in the trigger area and lubricated them with the oil that comes with the gun. I then reassembled the valve and screwed it back into the gun body. I reassembled the trigger making sure that the safety worked
... Read moreas it is designed to. The gun worked properly after the repair and continues to at this point. I am satisfied that the O-rings were the cause of the problem.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18987533
Manufacturer Part Number: 886098
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Nailer","title":"Nailer","url":"/parts/power-tool/nailer/"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/power-tool/nailer/seals-and-gaskets/"},{"position":3,"name":"886098","title":"886098","url":""}]
