Part Location Diagram of 886079 DeWALT O RING
See part 401 in the diagram
( Grid squares measure 1x1 inch )

O RING 886079

Manufactured by:
DeWALT
ERP Number:
ERP18987528
Part Number:
886079
Original Equipment Manufacturer ?
  Works with your model  COIL200!
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(2 rated repairs) ?
  Works with your model   COIL200!

Product Description

?

This is an authentic manufacturer-approved replacement part which is specially designed for use with Porter Cable staplers and nailers. It helps to provide an air-tight seal for the base, please make sure to check appropriate diagram of your model for correct location and use of this item. Over time the material may begin to deteriorate and crack eventually requiring replacement to maintain the top performance. Please note this high-quality rubber o-ring is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Porter Cable
This part works with the following products:
  • Nailer
Part# 886079 replaces these:
886079,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Leaking air and not firing

Johann from MELROSE PARK, Illinois

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Removed the four allen head screws from the cylinder cap and removed it
Removed the cylinder and cleaned the inside of the gun
Installed all of the o-rings, piston stop and gasket
Oiled the insides of the gun
Replaced the cylinder cap
Did you find this story helpful?
Thank you for voting!

Nailer won\'t fire, only leaked air while the trigger was depressed in the trigger area

Michael from Hines, Minnesota

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Disassembled the trigger and then removed the trigger valve from the body of the gun using a socket. I replaced all of the O-rings in the trigger area and lubricated them with the oil that comes with the gun. I then reassembled the valve and screwed it back into the gun body. I reassembled the trigger making sure that the safety worked as it is designed to. The gun worked properly after the repair and continues to at this point. I am satisfied that the O-rings were the cause of the problem.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18987528
Manufacturer Part Number: 886079
Brand Model Number Description
Porter Cable COIL200 Nailer - 2" Coil Nailer
Porter Cable FN250A Nailer - Finish Nailer
Porter Cable NSS150 Nailer - Super Narrow Crown 18 Gauge Stapler
Porter Cable RN175 Nailer - Roofing Nailer
Porter Cable RN175A Nailer - Roofing Nailer