Genuine Manufacturer Sourced replacement part designed for use with Porter Cable Nailer. This item is made out of Metal and it is Sold Individually. The Piston/Driver Assembly is the part of the nail gun that drives the nail into the material that is being used. To help extend the life of a pneumatic tool use the specified oil in it daily 4-5 Drops will do every time you use it. The Piston/Driver Assemblies do have a tendency to bend or break if not used correctly or if you are driving nails into extra hard material.
Remove the top cover
Remove the broken piston/driver
Place the o-ring on the new piston driver
Install the new piston/driver in the cylinder
Replace the top cover
Remove the top of the gun, then removed the bent driver. Remove the o-ring from the old piston and put it in the new one. Then inserted the new driver in the cylinder. Replaced the cap. Done,
Removed cap.
Remove the broken driver from the cylinder
Reused same piston ring
Inserted new driver in cylinder
Cleaned though out and oiled
Reassembled
1, Remove the four bolts that hold the top of the Nailer, and the top should come of easily
2,Then you can use the new piston driver to push the old one out, threw the tip were the nails come out
3,Then put the new one in and make sure you swap ring of the old piston and put it on the new one.
Did you find this story helpful?
Thank you for voting!
WasnÆt driving micro pin all the way in. Tip was bent and worn.
Pulled the top of pinner off. 4 allen bolts. Removed the existing driver. Took off the rubber oring seal. Installed the oring on the new driver. Carefully pushed it back in the head of the pinner. Installed the 4 allen bolts and tested it for leaks.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
