11880398-1-M-Makita-154655-4-Driver CPL.

( Grid squares measure 1x1 inch )

11880398-1-S-Makita-154655-4-Driver CPL.

Driver CPL. 154655-4

Manufactured by:: Makita
ERP Number:: ERP11880398
Part Number:: 154655-4

$148.04

Easy

15 - 30 mins

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Enter your model number

Jump to:

Troubleshooting Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:

Makita

This part works with the following products:

Nailer

Part# 154655-4 replaces these:

1546554,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

15 - 30 mins

(1 rated repair) ?

< Prev
1
Next >

Sort by:

Driver CPL hammer had separated from the piston head; would not drive nail and retract

Michael from Farmington, New Mexico

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Parts Used:: 154655-4, 213619-8

1. Remove 4 hex bolts from top of nail gun that hold the air cylinder head assembly.
2. Remove driver CPL pieces.
3. Place O ring in new driver CPL.
4. Replace Driver CPL into piston cylinder.
5. Replace air cylinder head assembly and replace 4 hex bolts. Bolts not tightened to any manufacturers specified torque

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP11880398
Manufacturer Part Number: 154655-4

Brand	Model Number	Description
Makita	AN923	Nailer - 3-1/2" Framer Nailer