This item is an authentic Hitachi replacement part that has been sourced from the original manufacturer to be used with pneumatic staplers. The bumper fits below the cylinder on the inside of the nose and is used to absorb the impact of the piston. This item is available as an individual replacement part.
Questions & Answers
?
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Hi Gregg, Thank you for your question. If your nail gun will not sink the nails deep enough, there are some parts that you will need to check to see which one is causing the issue. We recommend checking the the driver, the o-ring, the seal, the bumper, the springs, the oil, the trigger valve, and the piston ring. We have included a link from our website that you may reference on how to check these parts, https://www.ereplacementparts.com/repair-center/power-tool/nailer/doesn't-sink-nails-deep-enough/. Once you have determined the part you need, please call customer service. We look forward to hearing from you!
| Brand | Model Number | Description |
|---|---|---|
| Hitachi | N5008AC2 | Nailer - Stapler |
| Hitachi | N5008AC2M | Miscellaneous - 2 Inch 16 Ga Standard 7/16” Crown Construction Stapler |
| Hitachi | N5010A | Nailer - 1/2" Standard Crown Stapler |
| Hitachi | N5010AM | Miscellaneous - 2 Inch 16 Ga Medium 1/2 Inch Crown Stapler |
| Hitachi | NT65A5 | Nailer - Nailer |
| Hitachi | NT65A5M | Nailer - 2-1/2 Inch 16ga Finish Nailer Pro 2-1/2 Inch 16ga Straight Finish Nailer |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
