Part Location Diagram of S32186 DeWALT WASHER, SPECIAL
See part 6 in the diagram
( Grid squares measure 1x1 inch )

WASHER, SPECIAL S32186

Manufactured by:
DeWALT
ERP Number:
ERP18997383
Part Number:
S32186
Original Equipment Manufacturer ?
  Works with your model  PC5000!
$5.95
On Order
Minimum Quantity of 2 required

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   PC5000!

Troubleshooting

This part works with the following brands:
  • Bostitch
This part works with the following products:
  • Nailer
Part# S32186 replaces these:
S32186,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Broken piston/ shaft, heavy usage by prior owner.

Vincent from Underwood, Washington

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Printed out a parts list.
Dissembled staple gun. Cleaning is a must for repair. Mark down which parts were needed to reassemble. Ordered parts. Piston liner was lightly scared, used a brake hone and cutting oil to take off rough areas. Using the parts list reassembled the gun. Make sure that you use some lubricant for the piston on assembly. Connected to shop air, Works like a brand new one.
Did you find this story helpful?
Thank you for voting!
  • 1