Part Location Diagram of S06Z003200 DeWALT O RING
See part 7 in the diagram
( Grid squares measure 1x1 inch )

O RING S06Z003200

Manufactured by:
DeWALT
ERP Number:
ERP18997342
Part Number:
S06Z003200
Original Equipment Manufacturer ?
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Troubleshooting

This part works with the following brands:
  • Bostitch
This part works with the following products:
  • Nailer
Part# S06Z003200 replaces these:
PS06Z003200, S06Z003200,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Blowing air and oil out back of tool constantly when connected to compressor

Jerald from Tampa, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Disassembled, thoroughly cleaned with soft toothbrush and zep 505 degreaser, inspected all parts. Got replacements for worn ones. Gasket had failed, was probably the only \"must replace\" part, but I tracked back toward the compressor and replaced anything soft which might have failed and led to gasket failure. Dried with microfiber towel and compressed air, then reassembled with fresh oil on all parts and waited for delivery. I got the parts, installed them with the same procedure, and cranked the bolts tight. Hooked it up, and my $5 gamble on Facebook marketplace + $15 in parts took my Bostitch PN100 from brick to monster worth every bit of $100. I won\'t sell it, because as a pro woodworker on a budget, removing nails from found lumber is critical to profitability and, face it, availability of stock.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18997342
Manufacturer Part Number: S06Z003200
Brand Model Number Description
Bostitch PN100 Nailer - Industrical High Speed Impact Nailer
Bostitch PN100K Nailer - Palm Nailer Kit