This is an authentic Bostitch replacement part, sourced from the original manufacturer for use with impact nailers. The special seal is commonly used to form a seal between the valve and the cylinder assembly. This seal is available as an individual replacement part, please see model diagram for associative parts.
Troubleshooting
This part works with the following brands:
Bostitch
This part works with the following products:
Nailer
Part# S06Z002700 replaces these:
PS06Z002700, S06Z002700,
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
30 - 60 mins
(1 rated repair)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Blowing air and oil out back of tool constantly when connected to compressor
Disassembled, thoroughly cleaned with soft toothbrush and zep 505 degreaser, inspected all parts. Got replacements for worn ones. Gasket had failed, was probably the only \"must replace\" part, but I tracked back toward the compressor and replaced anything soft which might have failed and led to gasket failure. Dried with microfiber towel
... Read more and compressed air, then reassembled with fresh oil on all parts and waited for delivery. I got the parts, installed them with the same procedure, and cranked the bolts tight. Hooked it up, and my $5 gamble on Facebook marketplace + $15 in parts took my Bostitch PN100 from brick to monster worth every bit of $100. I won\'t sell it, because as a pro woodworker on a budget, removing nails from found lumber is critical to profitability and, face it, availability of stock.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18997341
Manufacturer Part Number: S06Z002700
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Nailer","title":"Nailer","url":"/parts/power-tool/nailer/"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/power-tool/nailer/seals-and-gaskets/"},{"position":3,"name":"S06Z002700","title":"S06Z002700","url":""}]
