Part Location Diagram of MRG019824 DeWALT O RING
See part 82 in the diagram
( Grid squares measure 1x1 inch )

O RING MRG019824

Manufactured by:
DeWALT
ERP Number:
ERP18993097
Part Number:
MRG019824
Original Equipment Manufacturer ?
  Works with your model  N12B!
$32.64
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(2 rated repairs) ?
  Works with your model   N12B!

Product Description

?

It is an authentic Bostitch replacement part that is supplied by original equipment manufacturer for use with pneumatic staplers and nailers. This is one of the o-rings for the trigger valve that engages the tool. Over time seals and o-rings may deteriorate or get compressed eventually requiring replacement. It is made with high quality rubber material and it is sold individually.

Troubleshooting

This part works with the following brands:
  • Bostitch
This part works with the following products:
  • Nailer
Part# MRG019824 replaces these:
MRG019824,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

leaking air

Jerome from ROGERS, Minnesota

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
MRG019824, 86459
could not repair. Through the nail gun away. new o rings did not help.
Did you find this story helpful?
Thank you for voting!

Not firing

Rex from Temple, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
MRG019824
Remove bad o-rings replace with new ones
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18993097
Manufacturer Part Number: MRG019824
Brand Model Number Description
Bostitch N100C Nailer - Coil-Fed Pneumatic Nailer
Bostitch N100S Nailer - Pneumatic Stick Nailer
Bostitch N12B Nailer - Coil-Fed Pneumatic Nailer
Bostitch N130C Nailer - Coil-Fed Pneumatic Nailer
Bostitch N55C Nailer - Coil-Fed Nailer
Bostitch N55CD Nailer - Coil-Fed Nailer
Bostitch N79PT Nailer - Pneumatic Stick Nailer
Bostitch N79RH Nailer - Pneumatic Stick Nailer
Bostitch N79WW Nailer - Pneumatic Stick Nailer
Bostitch N80C Nailer - Coil-Fed Nailer
Bostitch N80K2 Nailer - Stapler Remote Control Kit
Bostitch N80S Nailer - Stick Nailer
Bostitch N80SB Nailer - Pneumatic Stick Nailer
Bostitch N80SBM Nailer - Pneumatic Stick Nailer
Bostitch N86C Nailer - Coil-Fed Pneumatic Nailer
Bostitch N90PT Nailer - Pneumatic Stick Nailer
Bostitch N95162 Nailer - Pneumatic Stick Nailer
Bostitch N95RHN Nailer - Pneumatic Stick Nailer
Bostitch RN45B Nailer - Coil-Fed Pneumatic Roofing Nailer
Bostitch RN90PLEX Nailer - Round Head Duplex Na
Bostitch SDCN14 Nailer - Coil-Fed Pneumatic Nailer
Bostitch SDN11PTB Nailer - Pneumatic Stick Nailer
Bostitch SDN11RH Nailer - Pneumatic Stick Nailer
Bostitch T40S5-LM Nailer - Pneumatic Stapler
Bostitch T40S5-SF Nailer - Pneumatic Stapler
Bostitch T50S4 Nailer - Pneumatic Stapler