This item is an authentic replacement part that has been sourced from the original manufacturer to be used with Bostitch power tools. These special components help to provide a tight fit between connected parts. Over time items may wear out and begin to crack eventually requiring a replacement. Make sure to check the appropriate diagrams for your model to ensure the proper repair procedure. This high-quality repair kit is made is sold as an individual item.
Troubleshooting
This part works with the following brands:
Bostitch
Porter Cable
Stanley
This part works with the following products:
Nailer
Part# BOSCAP-RK replaces these:
BOSCAP-RK, PBOSCAP-RK,
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(2 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The driver was bent inside the nailer and the guide was damaged which took the longest to repair, had I known I would have ordered a new one with the drive pin. I took the four screws out of the top of the nailer and pulled the plastic housing out then the bent drive pin. I then cleaned the inside of the chamber and all the moving parts i
... Read moren there. I inserted the drive pin in the barrel pushed it down and used a screwdriver handle to keep it in place, while I push it through the drive pin guide, then push the whole assembly in. I did this after changing the seals which I did order a gasket and seal kit. I put a little of the lubricant that came in the kit in the head around the grove where the seals sit then press on the seals until they are properly seated. Then I put the new gasket after using a blade to carefully scrape off the old one. I then put the head back on and its working like new.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
