This item is an authentic replacement part that has been sourced from the original manufacturer to be used with Bostitch power tools. These special components help to provide a tight fit between connected parts. Over time items may wear out and begin to crack eventually requiring a replacement. Make sure to check the appropriate diagrams for your model to ensure the proper repair procedure. This high-quality repair kit is made is sold as an individual item.
Troubleshooting
This part works with the following brands:
Bostitch
Porter Cable
Stanley
This part works with the following products:
Nailer
Part# BOSCAP-RK replaces these:
BOSCAP-RK, PBOSCAP-RK,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
The driver was bent inside the nailer and the guide was damaged which took the longest to repair, had I known I would have ordered a new one with the drive pin. I took the four screws out of the top of the nailer and pulled the plastic housing out then the bent drive pin. I then cleaned the inside of the chamber and all the moving parts i
... Read moren there. I inserted the drive pin in the barrel pushed it down and used a screwdriver handle to keep it in place, while I push it through the drive pin guide, then push the whole assembly in. I did this after changing the seals which I did order a gasket and seal kit. I put a little of the lubricant that came in the kit in the head around the grove where the seals sit then press on the seals until they are properly seated. Then I put the new gasket after using a blade to carefully scrape off the old one. I then put the head back on and its working like new.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
