Part Location Diagram of 850006 DeWALT O-RING, 1.987X.103
See part A-12 in the diagram
( Grid squares measure 1x1 inch )

O-RING, 1.987X.103 850006

Manufactured by:
DeWALT
ERP Number:
ERP18986856
Part Number:
850006
Original Equipment Manufacturer ?
  Works with your model  N63CP!
$6.59
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   N63CP!

Product Description

?

It is a genuine item that is supplied by the original equipment manufacturer for use with Bostitch nailers and staplers. The o-ring attaches to the cylinder and is made of rubber. When replacing this part a screwdriver and an allen wrench might be required during the installation process. It will require replacing if it becomes broken. This part is available individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Bostitch
  • Craftsman
This part works with the following products:
  • Nailer
Part# 850006 replaces these:
850006,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bostich rn45-b was blowing air out through exhaust port.

Kevin from Fort Gratiot , Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Parts Used:
850006
Removed 4 allen screws over head valve , using a rubber mallet struck the frame down to dislodge the piston cylinder and driver , replaced bad o ring and well lubed everything and reassembled. Fairly straight forward stuff . O-ring was exactly what was needed and did not have to buy the larger more expensive repair kit!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18986856
Manufacturer Part Number: 850006
Brand Model Number Description
Craftsman 18981 - Stapler
Craftsman 18990 Nailer - Nailer
Craftsman 402N12B-1 Nailer - Coil-Fed Pneumatic Nailers
Craftsman 402T36-1 Chainsaw - Bostitch Stapler
Craftsman 402T36-26 Chainsaw - Bostitch Stapler
Bostitch 750S4 Nailer - Pneumatic Stapler
Bostitch 750S5 Nailer - Pneumatic Stapler
Bostitch 765S5-1E Nailer - Bostacker,s5,65mmmax
Bostitch 850S4 Nailer - Pneumatic Stapler
Bostitch 863S4 Nailer - Pneumatic Stapler
Bostitch IC60-1 Nailer - Industrial Coil Nail
Bostitch N12B Nailer - Coil-Fed Pneumatic Nailer
Bostitch N55C Nailer - Coil-Fed Nailer
Bostitch N55CD Nailer - Coil-Fed Nailer
Bostitch N57C Nailer - Coil-Fed Pneumatic Nailer
Bostitch N58C Nailer - Coil-Fed Nailer
Bostitch N63CP Nailer - Coil-Fed Pneumatic Nailer
Bostitch N64084-N64099 Nailer - Coil-Fed Pneumatic Nailer
Bostitch N64C Nailer - Coil-Fed Pneumatic Nailer
Bostitch RN45B Nailer - Coil-Fed Pneumatic Roofing Nailer
Bostitch SDCN14 Nailer - Coil-Fed Pneumatic Nailer
Bostitch SDCN14B Nailer - Coil-Fed Pneumatic Nailer
Bostitch T55S4 Nailer - Pneumatic Stapler
Bostitch T55S5 Nailer - Pneumatic Stapler
Bostitch WM45B Nailer - Pneumatic Coil Nailer