Part Location Diagram of 102882 DeWALT BUMPER
See part 21 in the diagram
( Grid squares measure 1x1 inch )

BUMPER 102882

Manufactured by:
DeWALT
ERP Number:
ERP18979568
Part Number:
102882
Original Equipment Manufacturer ?
  Works with your model  S32SX-3!
$22.15
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(2 rated repairs) ?
  Works with your model   S32SX-3!

Product Description

?

This genuine manufacturer-sourced part is specially made for use with Bostitch nailers and staplers. The purpose of this bumper is to keep the piston from hitting the bottom of the cylinder and damaging it. Because this part gets so much abuse it has a tendency to crack and fall apart eventually requiring a replacement. Please make sure to check the diagrams of your model for the exact location and application of this component. Keep in mind this high-quality bumper is made of durable rubber and is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Bostitch
This part works with the following products:
  • Nailer
Part# 102882 replaces these:
102882,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

nailer would not dispense nails

Billy from Kingwood, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
S32001, 102882
1. removed the top of the nailer.
2. removed the inner sleeve
3. replaced the bumper and orange washer
4. put sleeve and top in place
5. tested nailer and it worked like new
Did you find this story helpful?
Thank you for voting!

Broken piston/ shaft, heavy usage by prior owner.

Vincent from Underwood, Washington

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Printed out a parts list.
Dissembled staple gun. Cleaning is a must for repair. Mark down which parts were needed to reassemble. Ordered parts. Piston liner was lightly scared, used a brake hone and cutting oil to take off rough areas. Using the parts list reassembled the gun. Make sure that you use some lubricant for the piston on assembly. Connected to shop air, Works like a brand new one.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18979568
Manufacturer Part Number: 102882
Brand Model Number Description
Bostitch BT35B Nailer - Brad Nailer
Bostitch BT35B-2 Nailer - Bt35b Sideload Magaz
Bostitch BT50B Nailer - Brad Nailer
Bostitch BT50B-2 Nailer - Bt Brad Nailer-St
Bostitch PC5000 Nailer - Pneumatic Stapler
Bostitch S32SL Nailer - Pneumatic Stapler
Bostitch S32SL-OC Nailer - Pneumatic Stapler
Bostitch S32SLLM Nailer - Pneumatic Stapler
Bostitch S32SX Nailer - Pneumatic Stapler
Bostitch S32SX-2 Nailer - Pneumatic Stapler
Bostitch S32SX-3 Nailer - Pneumatic Stapler
Bostitch S32SX-BF Nailer - Pneumatic Stapler
Bostitch S32SX-BF-KIT Nailer - Pneumatic Stapler
Bostitch S32SX-BHF Nailer - Pneumatic Stapler
Bostitch S32SX-BHF-2 Nailer - Pneumatic Stapler
Bostitch S32SX-LATMAG Nailer - Pneumatic Stapler
Bostitch S32SXLM Nailer - Pneumatic Stapler
Bostitch S32SXLP Nailer - Pneumatic Stapler