This authentic OEM sourced replacement part is designed for use with Bostitch nailers and staplers. The trigger provides a user with a comfortable grip to control the sequential trigger function of the tool. The sequential trip requires the operator to hold the tool against the workpiece before pulling the trigger. This makes accurate fastener placement easier, for instance on framing, toe nailing and crating applications. The sequential trip allows exact fastener location without the possibility of driving a second fastener on recoil. The kit includes one high-quality plastic trigger and a durable metal pin to secure it.
Troubleshooting
This part works with the following brands:
Bostitch
DeWALT
This part works with the following products:
Nailer
Part# SEQ6 replaces these:
SEQ6,
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Correct part; quick repair
Good service. Easy on-line ordering. Appreciated getting a punch along with the trigger -- made replacement more expedient.
Jim - September 9, 2019
Verified Purchase
★★★★★
★★★★★
Exact part I needed excellent customer service
Great people to work with my only suggestion is please say no with the economy shipping option that sometimes tracking is not accurate because the United States post office Does not scan every piece of mail shipped economy. After waiting five days and tracking still showing not shipped called customer service and the very kind lady whose name I wish I could remember explain this to me and sure enough the next day it popped up out for delivery at my local post office it would’ve save me It would’ve save some stress if I had known this to begin with and I would’ve paid the extra money to have it shipped regular delivery as I needed the part and the two choices showed about the same time in transit thank you and have a great day
Guest - September 16, 2021
Verified Purchase
★★★★★
★★★★★
great
I have ordered parts in the past and I have not had any problems thank you !!!!
Guest - March 23, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Put gun on its side and use the 3/32\" drift and a small hammer to tap the spring pin that the trigger pivots on, out of the frame of the gun. That release the trigger into your hand.
If you have an older sequential trigger assembly, there is a spring between the trigger a
... Read morend the valve actuator. The new sequential trigger design doesn\'t accommodate the spring and doesn\'t need it.
Hold the new trigger in place in the frame with one hand so that it\'s pivot hole is aligned with the hole in the frame. Put the spring pin into the hole and gently tap it until it engages the frame on the other side.
The trigger should move freely. When the nailer foot is pressed and the trigger is squeezed, the trigger valve actuator should be pressed. If it looks good, attach the air supply and test it.
Per instructions, drive out roll pin, remove contact trip trigger and replace with the sequential trip trigger, driving the roll pin back in. Unit no longer fires on a bounce. Much more control.
Followed the simple instructions included with the parts. The only hiccup was that one drawing on the trigger kit, sequential pointed to the wrong pin to remove the trigger, but that became obvious when I looked closely at the tool. The hint to use compressed air to expel the old trigger valve was valuable.
Did you find this story helpful?
Thank you for voting!
Trigger was leaking air, both end gaskets were leaking and changed the trigger to sequential
Punched out pin.
Replaced trigger.
Hammered pin back in.
Simple!
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
