Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
12417540-1-M-DeWALT-174056-O-RING-66.5MMX2.0MM
Part Location Diagram of 174056 DeWALT O-RING-66.5MMX2.0MM
See part 17 in the diagram
( Grid squares measure 1x1 inch )
12417540-1-S-DeWALT-174056-O-RING-66.5MMX2.0MM 12417540-2-S-DeWALT-174056-O-RING-66.5MMX2.0MM 12417540-3-S-DeWALT-174056-O-RING-66.5MMX2.0MM Part Location Diagram of 174056 DeWALT O-RING-66.5MMX2.0MM

O-RING-66.5MMX2.0MM 174056

Manufactured by:
DeWALT
ERP Number:
ERP12417540
Part Number:
174056
Original Equipment Manufacturer ?
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

A Bit Difficult 

15 - 30 mins 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Frequently Purchased Together Troubleshooting Repair Instructions Model Cross Reference

Product Description

?

This is an original Bostitch replacement part manufactured for use with pneumatic nailers. The o-ring is commonly used to seal and secure the cylinder sleeve collar. This o-ring is sold individually, please see model diagram for associative parts.

Frequently Purchased Together

?
SEAL RING
★★★★★
★★★★★
(2)
$6.16
In Stock
Minimum Quantity of 2 required
O-RING-36.0MMX4.0MM
$6.16
In Stock
Minimum Quantity of 2 required
O-RING-41.0MMX1.78MM
$6.22
In Stock
Minimum Quantity of 2 required
O-RING-45.5MMX2.0MM
$6.16
On Order
Minimum Quantity of 2 required

Troubleshooting

This part works with the following brands:
  • Bostitch
  • DeWALT
This part works with the following products:
  • Nailer
Part# 174056 replaces these:
174056, P174056,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bostitch n75c siding nailer started shooting the piston out when I connected it to air.

Patrick from Greenville, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
175556, 174056, 174055, 174054
I removed the back section of the gun behind the trigger using an allen wrench set.
I looked inside and noticed the white collar was cracked.
I removed the piece by pushing out from the outside of the gun where the air vents.
Ordered the replacement part.
Parts came and I reassembled from the diagram on the website .
The parts were listed in order so it wasn\'t rocket science.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP12417540
Manufacturer Part Number: 174056
Brand Model Number Description
Bostitch CF15 Nailer - Corrugated Tool
DeWALT DW66C-1 Nailer - 15 Deg Coi Side Nail
DeWALT DWMC150 Nailer - 1.5 Metal Conec Nail
Bostitch MCN150 Nailer - Metal Connector Nailer
Bostitch MCN250 Nailer - Metal Connector Nailer
Bostitch MCN250S Nailer - Metal Connector Nailer
Bostitch N66BC Nailer - Cap Nailer
Bostitch N66BC-1 Nailer - Cap Nailer
Bostitch N66C Nailer - Coil-Fed Pneumatic Nailer
Bostitch N66C-1 Nailer - 15 Degrees Coil Siding Nailer
Bostitch N75C Nailer - Coil-Fed Pneumatic Sheathing Nailer
Bostitch N75C-1 Nailer - Coil Sheathing/Siding Nailer
O-RING-66.5MMX2.0MM
$ 6.16
In Stock
Minimum Quantity of 2 required
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖