See part A-42 in the diagram
( Grid squares measure 1x1 inch )
Blade Screw 2610016801
Manufactured by:
Dremel
ERP Number: ERP10260014
Part Number: 2610016801
?
Delivers in 3-5 Business Days!
Product Description
?
This is a Genuine replacement part designed for use with some Dremel Saws. This screw is made out of Metal and it is Sold Individually. Its purpose is to hold the Blade. Requires a Hex key/Allen wrench to install/remove this part.
Frequently Purchased Together
?
Troubleshooting
This part works with the following brands:
This part works with the following products:
★
Customer Part Reviews
?
Sort by:
Highest Rating
Most Recent
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Exact fit
Always the right part at reasonable price
Guest - May 22, 2019
Verified Purchase
it was E....asy
effortless and practical
Guest - May 23, 2019
Verified Purchase
Easy
Very easy to find what I needed. Check out was quick and received the part in good time. I will certainly bookmark this site.
Guest - June 5, 2019
Verified Purchase
Easy to find the parts online
Exact part
Guest - June 8, 2019
Verified Purchase
Worked better than expected
Thought I have had to replace the entire tool. But the part worked out great and I got it in a timely manner
Guest - August 31, 2019
Verified Purchase
misplace my other bolt, this one gets the tool up and running.
Fits my Dremmel saw, what a lifesaver.
Guest - December 14, 2021
Verified Purchase
4" Dremel Saw
Essential part to install a saw blade on the Dremel Saw.
Iglobal - May 11, 2022
Verified Purchase
Replacement part for a Dremel
Bought these to have replacement part/s on hand. Just what I needed.
Paul - November 16, 2023
Verified Purchase
Parts that was missing when we bought the item
Thank you very much for sending the parts that we needed. You were very fast and friendly. Have a great week and stay safe.
Guest - September 17, 2020
Verified Purchase
Sd ffg
Item was just what i expected and arrived on time too
Guest - September 29, 2020
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Sort by:
Most Helpful
Most Recent
Sorry, we couldn't find any existing installation instruction that matched.
The flange plate was accidentally lost
Kennedy from Avondale , Arizona
8 of 8 people
found this instruction helpful.
Easy
Less than 15 mins
Placed the replacement parts on the Dremel Saw Max.
Screw broke off
Thomas from Mayodan, North Carolina
7 of 7 people
found this instruction helpful.
Easy
Less than 15 mins
Socket set
The screw was reverse thread so I planed to drill and tap it and use another screw to get it out. The drilling caused the screw to come out on its own. Then all that was left is to attach the new screw.
Missing blade screw and flange plates.
cevero from DULCE, New Mexico
3 of 3 people
found this instruction helpful.
Easy
Less than 15 mins
Wrench set
Blade screw sheared off
William from Belleview, Florida
2 of 2 people
found this instruction helpful.
Easy
Less than 15 mins
Removed sheared screw and replaced it.
Lost flange, & blade screw
Virgil from Chattanooga, Tennessee
1 person
found this instruction helpful.
Easy
Less than 15 mins
Wrench set
Put new flange in and tightened screw.
Blade screw replacement
Glenda from OSCEOLA, Missouri
1 person
found this instruction helpful.
Easy
Less than 15 mins
Nutdriver
Your company is the only place I found the part I needed. Thank you, took 5 minutes to fix
Defrost sensor stopped working.
Ken from Temecula, California
1 person
found this instruction helpful.
Easy
15 - 30 mins
Screw drivers
Gained access to the evaporator and removed bad defrost sensors and replaced with new one.
SCREW STRIPPED
John from Linthicum Heights, Maryland
0 of 1 people
found this instruction helpful.
Easy
Less than 15 mins
Socket set
Lost / misplaced washer & Bolt specific to tool.
Andrew from Louisville, Kentucky
0 of 1 people
found this instruction helpful.
Easy
Less than 15 mins
1. Put on Washer
Loet the blade screw and washer.
Wendy from Hickory, North Carolina
0 of 1 people
found this instruction helpful.
Easy
Less than 15 mins
Both parts were missing so just put in place and screwed on
Model Cross Reference
This part works with the following models:
ERP Number: ERP10260014 2610016801
Brand
Model Number
Description
Dremel
F013SM2045
Multi-Tool
- Multipurpose Tool
Dremel
F013SM2046
Multi-Tool
- Multipurpose Tool
Dremel
SM20
Multi-Tool
- (F01300) Saw-Max Tool
Dremel
SM20120V
Multi-Tool
- Multipurpose Tool
Bosch
ULTRA-SAW20V
Multi-Tool
- Multipurpose Tool Cl
Dremel
US40
Multi-Tool
- (F01300) Ultra-Saw
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hardware","title":"Hardware","url":"/parts/power-tool/multi-tool/hardware/"},{"position":2,"name":"2610016801","title":"2610016801","url":""}]
