1. Removed screws from Oscillator case.
2. Removed motor and switchboard.
3. Unsoldered wires from old motor.
4. Soldered wire to new motor.
5. Reassembled motor and switchboard into case.
6. Replaced screws into Oscillator case.
Tool type above only allowed for Jig Saw selection, actual t
... Read moreool repaired was a Porter Cable Oscillator.
This repair was done on a Porter Cable oscillating saw. I disassembled the case, removed the complete internal assemble. Once everything was removed I de-soldered the old motor and installed the new one. It works like new, as strong as it was out of the box.
1. Disassembled the tool case.
2. Removed the motor from the assembly.
3. Resoldered the wires from the old motor.
4. Soldered the wires to the new motor.
5. Place the new motor into the assembly and reassembled the tool case.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18988937
Manufacturer Part Number: 90592745
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 90592745 DeWALT MOTOR ASSY")
_WW_1.gif "Part Location Diagram of 90592745 DeWALT MOTOR ASSY")
