Includes both the attachment and beveled gear. This worm follower gear is for stand mixers.
Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached.
Unplug the mixer before installing this part. Wear work gloves to protect your hands.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy and fast repair
Just what I needed fit right in. Received it before the delivery date. Thank you!
Hector - January 4, 2022
Verified Purchase
★★★★★
★★★★★
right part, easy repair, done deal
have rebuilt the mixer once before and with the parts ordered is back in new condition again. Used shortly after repair and all is good to go. Fast shipping and arrived quickly, alls good. Have used replacementparts.com on numerous occasions always 5 thumbs up
Robert - October 30, 2025
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Followed instructions I found on YouTube and on this website.
The repair was simple, cleaning the old grease from inside the unit took the most amount of time. Once I was satisfied all of the old lube was removed, I re-assembled the parts, checked for good alignment and smooth motion, re-lubed the entire mechanism, and closed it b
... Read moreack up.
I do not own a pair of snap ring pliers so I struggled with the C-clip but managed OK with two sets of regular pliers and an extra pair of hands.
Actual time for the parts replacement was only about 15 minutes, but the total time was closer to an hour because of the soiled lube, there were metal chunks in it from where the gear tooth had broken off and also ground metal that I wanted to remove - lube should not be gritty so I opted to remove all traces from all parts.
I viewed your you tube video regarding this repair. It saved me money, and I wouldn\'t have tried this repair without it. I listed the video for anyone that would like to view it.
https://www.youtube.com/watch?v=VeCiivPt7hk
Did you find this story helpful?
Thank you for voting!
Overloaded and broken gears resulting in mixer failure.
I found the eReplacementParts YouTube video describing the repair to the KitchenAid Pro600 mixer which is our machine. I was able to use the video to familiarize myself with the equipment before attempting disassembly. This made identification of parts much easier and obtaining the replacement parts from your company was quite straight
... Read moreforward. Your rep was helpful and the parts were shipped out expeditiously, arriving in two days across country. One anomaly that I encountered, after completing the repair, I ran the mixer for a few minutes to get the grease throughout the gear assembly. I noticed a slight variation in speed while the machine was running. I don\'t know whether that is an indication of a problem or not.
Overall, I couldn\'t be more pleased with the tutorial, parts availability and support.
Read less
Did you find this story helpful?
Thank you for voting!
Mixer was skipping/grinding gears and was not able to mix contents
I used the disassembly/reassembly instructions on one of the eReplacementparts.com videos on YouTube (https://www.youtube.com/watch?v=lsbgUHAGWX4). It was excellent. From this, we discovered that we needed 4 parts in total - housing, bevel gear, worm gear, and one other part I can\'t recall the name of. We also needed to buy the planetar
... Read morey grease. The video is extremely clear and lit well and it was very easy to follow in order to install all of the new parts.
This morning I used my newly repaired mixer to mix a batch of dough with no problems at all.
A tip: when removing the planetary, the grease may cause the fiber washer (B-11
Washer, Fiber Part #: 9703434) to stick underneath the main unit. I thought that I had lost this washer and ordered a new one. Be sure to check underneath to see if it\'s stuck there before deciding that the washer is lost and buying a new one.
Followed the instructions given in your you tube video for taking the mixer apart, cleaning out the old grease, adding the new part with new grease, and re-assembly. The video was well made and easy to understand.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12348886
Manufacturer Part Number: W11192795
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
