This part is an authentic replacement from Hitachi. This staple feeder is used on Hitachi staplers. This part is made of metal and it is sold separately. This part is used to hold the back of the staples once they are loaded and secured. When using, this part: pull backward on the staple feeder to where the feeder is in the stopper hole. After loading the staples, make sure you can slide the staples along the magazine without any problems. Double check if the staple feeder is brought back all the way, because if not this can cause the staples to get clogged or scattered.
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
| Brand | Model Number | Description |
|---|---|---|
| Metabo HPT | N3804A5 | Miscellaneous - Stapler N 3804a5 |
| Hitachi | N3804A5M | Miscellaneous - 1-1/2 Inch 18ga Pro Finish Stapler 1/4 Inch Crown Pro Finish Stapler |
| Hitachi | N3804AB3 | Nailer - 1/4" Narrow Crown Stapler |
| Hitachi | N3804AB3M | Miscellaneous - 1 1/2 Inch 18 Ga Narrow 1/4 Inch Crown Stapler |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
