1.Remove wiring cover on motor housing, one screw . Breaker is attached to this with a thin nut.
2.Remove tape covering wire nuts. This will allow you to see the numbers on the wires.
3.Rearrange and wire nut wires according to diagram on inside of cover for 220 v. operation.
4.Retape wires and wire nut connections.
... Read morer />5.Pull spade connectors off of old (30 amp.) breaker.
6.Remove retaining nut from old breaker and pull breaker from housing. Save the breaker, you may want to switch back to 110 v. down the road.
7.Push new 15 amp. breaker into housing and fasten with thin nut.
8.Push spade connectors, removed in step 5, back onto new breaker terminals.
9.Replace wiring cover back onto motor housing.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19156135
Manufacturer Part Number: JT9-JMD18-303
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of JT9-JMD18-303 Jet THERMAL RELAY")
_WW_1.gif "Part Location Diagram of JT9-JMD18-303 Jet THERMAL RELAY")
