An authentic replacement component which is supplied directly from the original equipment manufacturer for use with Troy-Bilt and MTD log splitters. This is the flexible coupling which is attached to the gear pump, please make sure to check appropriate diagrams of your model for the correct location and use of this item. Over time the part may wear out and begin to fail eventually requiring replacement to maintain peak performance. It is a high-quality component which is made of durable metal and it is sold individually.
Troubleshooting
This part works with the following brands:
Troy-Bilt
MTD
Yard Machines
Cub Cadet
Craftsman
Ryobi
This part works with the following products:
Log Splitter
Part# 918-04145 replaces these:
718-04145, 918-04145,
★
Customer Part Reviews
?
4.7
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
5 stars
2
4 stars
1
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
All around great to deal with
Parts descriptions models of everything imaginable or are available allowing you to see what you need. Parts are always a spot on match and the quality is OEM
Guest - February 19, 2020
Verified Purchase
★★★★★
★★★★★
Great oart
I felt it was a little overpriced. That being said it arrived early and was perfect.
Guest - September 5, 2025
Verified Purchase
★★★★★
★★★★★
easy to install
the part appears to be a heavier and hopefully a stronger part than the last part we installed it was very easy to install we just installed it so it will be a while to determine the durability of the part
Guest - December 2, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed the engine. Just 3 bolts.
2. Used an Allen wrench to loosen the set screws on both the top and bottom coupling.
3. Cleaned everything up and installed new flexible coupling.
4. Replaced engine. This part was a little tricky because you have to line everything up just right.
1- Removed the engine
2- Removed the coupling guard and disconnected the hydraulic pump
3- Removed both halves of the flex coupling with the gear puller
4- Slid the new coupling halves onto the corresponding shafts and secured the coupling onto the engine shaft with the set screw
5- Temporarily attached the couplin
... Read moreg guard (rotated it 90 degrees so I had access to the hydraulic pump coupling) and hydraulic pump to achieve the proper spacing between coupling halves.
6- Aligned the coupling halves and mounted the engine temporarily.
7- Secured the coupling on the hydraulic pump.
8- Removed the engine and coupler guard.
9- Reattached the hydraulic pump and coupler guard.
10- Realigned the coupler halves and reattached the engine.
I was shocked at how easy this job was. My Troy built was designed in a way that all you have to do is remove the engine, 3 bolts to get the coupler out. Remove engine bolts, carefully slide engine off the coupling, replace the coupling, and reattach engine. That was it. Also, to gain easy access to everything I just tilted the splitter b
... Read moreack until the splitting beam touched the ground, that put everything in front of me at a 45 degree angle. Piece of cake!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19301172
Manufacturer Part Number: 918-04145
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 918-04145 Husky COUPLING-LOGSP .87")
_WW_1.gif "Part Location Diagram of 918-04145 Husky COUPLING-LOGSP .87")
