Model or Part #

Close

Official OEM Guarantee

Fast shipping from USA

365 Day Returns

Preferred Brand Partners

19283065-1-M-Husky-753-05660-ENGINE CVR REAR

( Grid squares measure 1x1 inch )

19283065-1-S-Husky-753-05660-ENGINE CVR REAR

Part Location Diagram of 753-05660 Husky ENGINE CVR REAR

ENGINE CVR REAR 753-05660

Manufactured by:: Husky
ERP Number:: ERP19283065
Part Number:: 753-05660

?

$50.54

★★★★★

★★★★★

Easy

Less than 15 mins

(11 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Enter your model number

Jump to:

Description Troubleshooting Reviews Repair Instructions Model Cross Reference

Product Description

?

This replacement engine cover assembly is a high quality item that is specially produced for Troy-Bilt blowers. This assembly includes the pull starter mechanism which allows user to pull-start the equipment. Please note this assembly includes one durable red plastic cover, starter pulley, pull rope with a grip handle and the hardware to secure it. You will need a screwdriver to complete this repair.

Troubleshooting

This part works with the following brands:

Troy-Bilt

This part works with the following products:

Leaf Blower / Vacuum

Part# 753-05660 replaces these:

753-05660,

★

Customer Part Reviews

?

5.0

Average Rating (out of 5):

★★★★★

★★★★★

(2 Reviews)

Click to filter by ratings:

5 stars

2
4 stars

0
3 stars

0
2 stars

0
1 star

0

< Prev
1
Next >

Sort by:

★★★★★

★★★★★

perfect

perfect

Guest - April 21, 2020

Verified Purchase

★★★★★

★★★★★

Very easy repair. Works great

Blower is working great again

Guest - May 17, 2021

Verified Purchase

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

Less than 15 mins

(11 rated repairs) ?

< Prev
1
2
Next >

Sort by:

Needed new starter spring & cord

James from Yonkers, New York

4 of 4 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 753-05660

Remove the old engine cover and screw the new one into place.

Did you find this story helpful?

Pull starter failed and had to replace the engine cover.

John from Peach Tree, Georgia

3 of 3 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 753-05660

Part arrived on time and repair was made several days later easy and painless. Hardest part was transfering labels from old cover to new cover. Don\'t know why a new set of fasteners is included. I did not use them old ones worked fine

Did you find this story helpful?

Pull cord broke

William from Minden, Louisiana

2 of 2 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 753-05660

Replace plastic engine cover which includes new pull cord assembly. I used the electric drill as a screw remover, replacer, torx head bit in it. Made job go much faster and easier than hand screwing the screws out then back in.

Did you find this story helpful?

Blower starter rope broke

Ludmila from Buford, Georgia

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers
Parts Used:: 753-05660

Replace whole engine cover

Did you find this story helpful?

Lawn mower start rope broken plus the coiled spring broken

Albert from Mt Pleasant, South Carolina

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 753-05660

I unscrewed the cover that holds these components and saw what the problem was so I order new cover that had the components mounted inside. After replacing the cover I cranked the unit up and started using it again. No problem at all with doing this procedure.

Did you find this story helpful?

Starter rope broken, hard to start, would not run full throttle.

John from Rockford, Michigan

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers
Parts Used:: 753-05677, 753-05676A, 753-05660

replaced cover with pull cord, replaced carburetor and gasket.

Did you find this story helpful?

Starter rope and rope housing broke.

Kim from San Antonio, Texas

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 753-05660

Put the new engine cover with integrated starter rope in.

Did you find this story helpful?

The pull rope would not retract

David from Walls, Mississippi

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers, Socket set
Parts Used:: 753-05660

Removed the old cover . Installed the new cover and pulled it started right up . I like that I was able to get it all in one piece . Made it a very easy fix .

Did you find this story helpful?

Gas powered blower pull start string broke.

Chad from SANDY, Utah

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 753-05660

Removed the old starter and replaced it with the new.

Did you find this story helpful?

Blower pulley spring broke

Larry from Tuscaloosa, Alabama

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver
Parts Used:: 753-05660

Ordered pulley housing cover and replaced it

Did you find this story helpful?

< Prev
1
2
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP19283065
Manufacturer Part Number: 753-05660

Brand	Model Number	Description
Troy-Bilt	TB4BP	Leaf Blower / Vacuum - Blower