Part Location Diagram of 753-05660 Husky ENGINE CVR REAR
See part B24 in the diagram
( Grid squares measure 1x1 inch )

ENGINE CVR REAR 753-05660

Manufactured by:
Husky
ERP Number:
ERP19283065
Part Number:
753-05660
Original Equipment Manufacturer ?
Special Order

Easy 

Less than 15 mins 

(11 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This replacement engine cover assembly is a high quality item that is specially produced for Troy-Bilt blowers. This assembly includes the pull starter mechanism which allows user to pull-start the equipment. Please note this assembly includes one durable red plastic cover, starter pulley, pull rope with a grip handle and the hardware to secure it. You will need a screwdriver to complete this repair.

Troubleshooting

This part works with the following brands:
  • Troy-Bilt
This part works with the following products:
  • Leaf Blower / Vacuum
Part# 753-05660 replaces these:
753-05660,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
  • 5 stars
    2
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(11 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Needed new starter spring & cord

James from Yonkers, New York

4 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
753-05660
Remove the old engine cover and screw the new one into place.
Did you find this story helpful?
Thank you for voting!

Pull starter failed and had to replace the engine cover.

John from Peach Tree, Georgia

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
753-05660
Part arrived on time and repair was made several days later easy and painless. Hardest part was transfering labels from old cover to new cover. Don\'t know why a new set of fasteners is included. I did not use them old ones worked fine
Did you find this story helpful?
Thank you for voting!

Pull cord broke

William from Minden, Louisiana

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
753-05660
Replace plastic engine cover which includes new pull cord assembly. I used the electric drill as a screw remover, replacer, torx head bit in it. Made job go much faster and easier than hand screwing the screws out then back in.
Did you find this story helpful?
Thank you for voting!

Blower starter rope broke

Ludmila from Buford, Georgia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
753-05660
Replace whole engine cover
Did you find this story helpful?
Thank you for voting!

Lawn mower start rope broken plus the coiled spring broken

Albert from Mt Pleasant, South Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
753-05660
I unscrewed the cover that holds these components and saw what the problem was so I order new cover that had the components mounted inside. After replacing the cover I cranked the unit up and started using it again. No problem at all with doing this procedure.
Did you find this story helpful?
Thank you for voting!

Starter rope broken, hard to start, would not run full throttle.

John from Rockford, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
replaced cover with pull cord, replaced carburetor and gasket.
Did you find this story helpful?
Thank you for voting!

Starter rope and rope housing broke.

Kim from San Antonio, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
753-05660
Put the new engine cover with integrated starter rope in.
Did you find this story helpful?
Thank you for voting!

The pull rope would not retract

David from Walls, Mississippi

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
753-05660
Removed the old cover . Installed the new cover and pulled it started right up . I like that I was able to get it all in one piece . Made it a very easy fix .
Did you find this story helpful?
Thank you for voting!

Gas powered blower pull start string broke.

Chad from SANDY, Utah

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
753-05660
Removed the old starter and replaced it with the new.
Did you find this story helpful?
Thank you for voting!

Blower pulley spring broke

Larry from Tuscaloosa, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Parts Used:
753-05660
Ordered pulley housing cover and replaced it
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2