This replacement fuel pipe is specially made for Echo backpack blowers. It is a genuine OEM sourced item, not an aftermarket imitation. The purpose of this fuel line is to deliver fuel from the tank to the carburetor. Over time the fuel lines will deteriorate and become brittle requiring replacement. It is made from flexible plastic and it is sold individually.
Dumped all fuel into a gas can. Used a wire shepherd\'s hook that I made from a hangar, and used it to pull the fuel pipe to the tank opening and popped it out of the tank. Then, removed the grommet using a wide blade screwdriver to get it started out of its seat. Once there, I removed the fuel pipe, fuel line & return, and pulled the
... Read morebrass lines from the old grommet.
Reassembly with new components is simply the same in reverse order. Once completed, install new fuel filter and use the shepherd\'s hook to move the fuel pipe/filter to its original position in the tank.
Removed old carburetor, fuel lines, gaskets, filter and spark plug, replaced with new. Set carb high & low jets, started, fine tuned. Blower runs great!
Did you find this story helpful?
Thank you for voting!
Backpack blower retainer cushions all broke and straps old and torn fuel lines old and brittle ignition switch on off button missing.
1. First I disassembled the ignition switch, the only tool needed was a screwdriver to remove the screws in handle once screws are out separated the handle which opens up down the middle into 2 pieces.
2. Removed switch and all wires from handle and plastic protective tubing that runs to the back of blower.
3. Installed new s
... Read morewitch and wiring in reverse fashion, fairly easy, the hardest part was running wires back in protective plastic tubing because you don\'t want excessive wires in the handle you want just the right amount of wiring needed in handle that way wires don\'t get pinched.
1. Next I replaced the 3 retainer cushions that hold the blower onto the backpack. Removed all broken cushions with screw driver on blower and screwdriver and nutdriver for the backpack portion.
2. Screwed new cushions onto blower portion, then put blower new cushion threads through backpack mounting holes, used nutdriver to thread nuts onto backpack. Very easy repair.
1.Next I replaced backpack straps screwdriver and nutdriver were the only tools I needed removed old straps and replaced with new ones in reverse fashion, very easy
1. Next I replaced both fuel line running from carb to fuel tank using a screwdriver had to loosen the carb up to gain access to install new lines, old fuel lines just pull right off if they are a little sticky, a flathead screwdriver or plyers should help remove them, new fuel lines just press right on to carb and fuel tank.
2. There also is a plastic protective twine around fuel lines just untwine from old lines and rewind around new lines. Fairly easy
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9261883
Manufacturer Part Number: 13201008260
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_6.gif "Part Location Diagram of 13201008260 Echo Pipe-fuel")
_WW_6.gif "Part Location Diagram of 13201008260 Echo Pipe-fuel")
