Part Location Diagram of P003002230 Echo Repair Kit
See part B-32 in the diagram
Replacing your Echo Leaf Blower / Vacuum Repair Kit
( Grid squares measure 1x1 inch )

Repair Kit P003002230

Manufactured by:
Echo
ERP Number:
ERP9227840
Part Number:
P003002230
Original Equipment Manufacturer ?
  Works with your model  CS-550P!
$28.33
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(6 rated repairs) ?
  Works with your model   CS-550P!

Product Description

?

This is an authentic Echo replacement part that has been sourced from the original manufacturer to be used with blowers and chainsaws. Ethanol in gasoline can build up deposits and over time can clog the fuel passageways inside the carburetor. A clogged carburetor can cause poor engine performance and can prevent fuel from getting into the motor causing it to abruptly shut-off. If this occurs the carburetor can be cleaned and re-built, and this kit contains the necessary parts to reassemble the carburetor.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Echo
  • Shindaiwa
This part works with the following products:
  • Leaf Blower / Vacuum
Part# P003002230 replaces these:
P003002230,

Videos For installing this part.

?
Replacing your Repair Kit

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Blower would only run when choke was on

Mike from Dallas, Texas

9 of 9 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
P003002230
Resolved issue by rebuilding the carburetor using the carburetor repair kit video and diagrams provided on ereplacementparts website. I removed the carburetor from the blower, cleaned the carburetor thoroughly using carburetor cleaner, then reassembled the carburetor using all the parts provided in the carburetor rebuild kit. Blower now runs better than it has in years. I purchased the carburetor brand new 3 years ago - this is the first time I\'ve had to do carburetor work since.
Did you find this story helpful?
Thank you for voting!

Would idle but then stalled when throttle opened

Martin from Columbia, South Carolina

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
90156Y, P003002230
1. Replaced fuel filter, air filter and spark plug. Did no resolve the problem.
2. Rebuilt carb with repair kit.
3. Problem resolved.
Did you find this story helpful?
Thank you for voting!

Engine hard start

kevin from Williamstown, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
P003002230
R & R carb install new carb parts
Did you find this story helpful?
Thank you for voting!

I screwed up and spray starter fluid in the carburetor, which damaged the fuel pump diaphragm. Live and learn. :o)

Jim from BUMPASS, Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
P003002230
1. Removed the air filter.
2. Removed the carburetor.
3. Disassembled the carburetor, making sure to keep all the parts in order and in correct orientation.
4. Installed the new gaskets/diaphram.
5. Reinstalled the carburetor.
6. Reinstalled the air fillter.
7. Put a few drops of gas in the cylinder.