This is an authentic Echo replacement part that has been sourced from the original manufacturer to be used with handheld blowers. The plastic lever is used to actuate the throttle rod to adjust the fuel input or engine power. This lever is available as an individual replacement part, please see illustrated diagram fro associative parts.
Troubleshooting
This part works with the following brands:
Echo
This part works with the following products:
Leaf Blower / Vacuum
Chipper Shredder
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
1- 2 hours
(2 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
We were getting no spark from the coil even after I took the engine out of the plastic case and chucked it in the lathe to spin it fast enough to where it should have been making fire.
John from Dallas, Texas
14 of 14 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Once I had decided that the magneto was not producing any spark I disassembled the blower assembly to get at the magneto where it screws to the block. It is really just a big 3D jigsaw puzzle with not that many pieces. I wish I had ordered a new spark plug boot because it tore apart when I removed it from the old ignition wire. I taped it
... Read more up and it will work OK.
Putting the handle and blower assembly back together requires you to hold your mouth just right and it took me several tries before I finally got the fuel tank, handle and blower cowl to hang together correctly. Pay particular attention how the kill switch wires are routed thru the handle so they will not interfere with the throttle latch / lever. Look at the blow up diagram of the handle assembly to get the throttle wire back in the right position.
Hint: Take several pictures of the throttle linkage and inside the handle wiring before you take it all apart. It will help when you reassemble.
Read less
Did you find this story helpful?
Thank you for voting!
Dropped the blower and broke the throttle lock lever.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_3.gif "Part Location Diagram of C453000260 Echo Lever-throttle")
_WW_3.gif "Part Location Diagram of C453000260 Echo Lever-throttle")
