Part Location Diagram of 17801120561 Echo Throttle Rod
See part I-24 in the diagram
( Grid squares measure 1x1 inch )

Throttle Rod 17801120561

Manufactured by:
Echo
ERP Number:
ERP8899803
Part Number:
17801120561
Original Equipment Manufacturer ?
  Works with your model  ES-211!
$9.05
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(3 rated repairs) ?
  Works with your model   ES-211!

Product Description

?

This is an authentic replacement part manufactured for use with gas-powered leaf blowers. The special throttle rod is used to link the throttle lever and the throttle valve on the carburetor. This throttle rod is available as an individual replacement part, please see model diagram for associative parts.

Troubleshooting

This part works with the following brands:
  • Echo
  • Shindaiwa
  • Little Wonder
This part works with the following products:
  • Leaf Blower / Vacuum
  • Chipper Shredder
Part# 17801120561 replaces these:
17801120561,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Throttle rod missing

Frank from Belleair Beach, Florida

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
15901019830, 17801120561
Remove filter cover then detach the throttle rod from the carburetor. Open the handle and remove the rod from the trigger. Install new rod and reassemble. I also decided to replace the spark plug and that just took a socket wrench.
Did you find this story helpful?
Thank you for voting!

The carb was still leaking after rebuilding it with new gaskets, installed new carburetor.

Brian from Moreno Valley, California

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Safety first, run the blower out of gas or empty the tank
1. Pull start cord and wrap around to move pull handle out of the way
2. Remove the air filter cover and filter
3. Remove 2 screws holding on the carb to the intake
4. Remove old carb gasket.
5. Good time to clean while carb is off.
Install is sa me in reverse order.
NOTE:
Be careful while working with the throttle rod, if it comes off, you will have to removed the outer case, not hard, but necessary.
Did you find this story helpful?
Thank you for voting!

Trimmer and blower repair

Bob from REYNOLDSBURG, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Carb cleaned and replace gaskets diaphram
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8899803
Manufacturer Part Number: 17801120561
Brand Model Number Description
Little Wonder 9555 Leaf Blower / Vacuum - Mantis Blower/Shredder Vacuum
Shindaiwa EB212 Leaf Blower / Vacuum - Power Blower
Echo ES-210 Chipper Shredder - Shred &#39N&#39 Vac
Echo ES-2100 Chipper Shredder - Shred &#39N&#39 Vac
Echo ES-211 Chipper Shredder - Shred &#39N&#39 Vac
Echo ES-2400 Chipper Shredder - Shred &#39N&#39 Vac
Echo PB-200 Leaf Blower / Vacuum - Handheld
Echo PB-201 Leaf Blower / Vacuum - Handheld
Echo PB-2100 Leaf Blower / Vacuum - Handheld
Echo PB-2155 Leaf Blower / Vacuum - Handheld Blower
Echo PB-2455 Leaf Blower / Vacuum - Handheld Blower
Shindaiwa SV212 Leaf Blower / Vacuum - Shredder Vac Blower