Part Location Diagram of E164000130 Echo Flexible Blower Tube
See part B-11 in the diagram
Replacing your Echo Leaf Blower / Vacuum Flexible Blower Tube
( Grid squares measure 1x1 inch )

Flexible Blower Tube E164000130

Manufactured by:
Echo
ERP Number:
ERP16500360
Part Number:
E164000130
Original Equipment Manufacturer ?
  Works with your model  PB-620H!
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(16 rated repairs) ?
  Works with your model   PB-620H!

Product Description

?

This is a Genuine Manufacturer Sourced replacement part used on Echo Backpack Blowers. This Flexible Tube is made out of Plastic and it is Sold Individually. This part is attached to Hard Plastic Blower Tubes with Metal Clamps that are Sold Separately. Over time this part can become brittle and crack allowing for air leaks. This will greatly decrease Blowing/Suction ability of the unit, therefore this part should be replaced.

Troubleshooting

This part works with the following brands:
  • Echo
  • Shindaiwa
This part works with the following products:
  • Leaf Blower / Vacuum
Part# E164000130 replaces these:
E164000000,

Videos For installing this part.

?
Replacing your Flexible Blower Tube

Customer Part Reviews

?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(8 Reviews)
Click to filter by ratings:
  • 5 stars
    7
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(16 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Straps worn out and about to break. One blower tube missing and flex had hole in it

Lee from Easley, South Carolina

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Watch as you remove the bad parts carefully and reverse the process to install the new parts. I would also like to ad that the ereplacementparts.com site did an outstanding job getting my order together and out the door. The price was also about 15% below local dealers and arrived in a couple of days. Also ordering is so simple because of the way the site is laid out. Blown up illustrations of you parts help to make sure you are ordering what you need.

Very pleased with the entire experience and my old blower looks good and works like it did when it was first bought. Thanks and I will use you again.
Did you find this story helpful?
Thank you for voting!

Original wore out, developed holes in the tube

David from Rolling Prairie, Indiana

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
E164000130
Unclipped the tie wraps for the control cable, unscrewed the clamps, replaced the tube, reapplied the tie wraps. Done!
Did you find this story helpful?
Thank you for voting!

Tube worn out

Paula from Houston , Texas

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
E164000130
Remove the clamps on each side of the worn tube and remove
Install the new tube with the clamps.
Did you find this story helpful?
Thank you for voting!

Replacement parts

Tommie from Saginaw, Michigan

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Removed the worn and broken parts. Replaced with the new.
Did you find this story helpful?
Thank you for voting!

Flexible hose had a hole in it

Charles from Baltimore, Maryland

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
E164000130
Unscrewed clamps. Cut old hose off. Connected nee hose and tightened clamps.
Did you find this story helpful?
Thank you for voting!

Cushion between motor and backpack assembly was broken and flexible blower hose had a hole

Thomas from Sterlington, Louisiana

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Socket set
Replaced broken parts. Schematics provided on the website made ordering very easy. FIVE STARS our of FIVE.
Did you find this story helpful?
Thank you for voting!

Purchased at garage sale cleaned carburetor and got blower running and parts were missing and I bought parts to replace missing ones

Ernest from Milford, New Jersey

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Replaced parts missing from unit
Did you find this story helpful?
Thank you for voting!

The blower tube would not stay connected to the blower

Gary from Bryan, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1. Removed all the old parts
2. Connected everything together
3. Attached to the blower
Did you find this story helpful?
Thank you for voting!

Flex tube developed holes.

Donald from Monroe, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
E164000130
Repair was simple
Did you find this story helpful?
Thank you for voting!

DidnGÇÖt have the parts.

Linda from Wheatland, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1. Attached all parts.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP16500360
Manufacturer Part Number: E164000130
Brand Model Number Description
Shindaiwa EB508RT Leaf Blower / Vacuum - Blowers Backpack
Echo PB-260L Leaf Blower / Vacuum - Backpack Blower
Echo PB-261i Leaf Blower / Vacuum - Backpack Blower
Echo PB-261L Leaf Blower / Vacuum - Backpack Blower
Echo PB-265L Leaf Blower / Vacuum - Backpack Blower
Echo PB-265LN Leaf Blower / Vacuum - Low Noise Backpack Blower
Echo PB-403 Leaf Blower / Vacuum - Backpack Blower
Echo PB-403H Leaf Blower / Vacuum - Backpack Blower
Echo PB-403T Leaf Blower / Vacuum - Backpack Blower
Echo PB-413 Leaf Blower / Vacuum - Backpack Blower
Echo PB-413H Leaf Blower / Vacuum - Backpack Blower
Echo PB-413HT Leaf Blower / Vacuum - Backpack Blower
Echo PB-413T Leaf Blower / Vacuum - Backpack Blower
Echo PB-500 Leaf Blower / Vacuum - Blower
Echo PB-500H Leaf Blower / Vacuum - Backpack Blower
Echo PB-500T Leaf Blower / Vacuum - 50.8cc PBackpack ower Blower
Echo PB-603 Leaf Blower / Vacuum - Backpack Blower
Echo PB-611 Leaf Blower / Vacuum - Backpack Blower
Echo PB-620 Leaf Blower / Vacuum - Backpack Blower
Echo PB-620H Leaf Blower / Vacuum - Backpack Blower
Echo PB-620ST Leaf Blower / Vacuum - Backpack Blower